This version has extended RAM buffer for excellent error correct. Good for archive retrieval. Used many times with no problems - 800 hours. Perfect condition. RF signal from head is absolutely perfect, but always reads 100-200 error count. #9 condition
20bit ADAT machine in excellent condition with only 102 hours of actual head use! One minor dent on front top edge. Fully serviced and tested, with AP updates and all Alesis updates, new belts and roller. You won't be disappointed!
Pro Machine, better reliable transport, full feature, RCA in/out, COAX, Optical in/out. Unit has seen virtually no use time, rack mount and original remote. Super bit mapping or standard 44. 1 and 48 Sony "long Play" #9+ condition
Full feature DAT Machine rack Mount design with Original Remote. Analogue XLR IN & XLR OUT, AES/EBU & S/P DIF optical digital connectors IN & OUT. Bench tested all OK, Low use time unit with owners manual. (pdf) #9 condition
8 track digital recorder, SN FX8000043. Low use hours, version 1. 03 EPROM update. Basic manufacturer updates, RF head capacitor update. Lettering worn on "stop" and "power" buttons. Completely cleaned, serviced, and calibrated. Heads still 90% good.
(This is NOT an XT20) 18 bit machine. SN 3030999. 800 hours use time but unit head in near perfect condition. Basic mods (by Alesis) done. Excellent head and RF carrier recovery. We have used this machine for assistance in ADAT archival retrieval. All Tested clean & calibrated. Condition 9
Complete DAT transport, only for use to drop into customer machine (we might buy your used transport). Tested and serviced. Drop in 4 connectors - Reuse your cables. Heads goods 80% +. Make sure to attach diode anti-static wire. Condition 8+ Note: Drop in unit with door slightly open is how to set up.
Complete DAT transport. Tested and serviced. Drop in 4 connectors - Reuse your cables. Heads goods 90% +. Make sure to attach diode anti-static wire. Condition 9+ Note: Drop in unit with door slightly open is how to set up.
With drawer assembly, RF HeadExcellent, 90% good(worth $200 alone) #9 Tested good working pinch roller #8 (Please be aware these are very thoroughly serviced and tested with difficult tapes, but some ageing DAT tape get sticky or warped shells can be problematic. ) (3) available
With ADAT remote, sync cable, optical cable link. Very low use time. 100s of hours. Basic service has been done. New belts and drive idler. Condition is a #9.
Black face older machine with very low use hours. Excellent #9 condition with all ADAT updates. 8 1/4" analog ins/outs, Rewind/FF/Play/Stop/Record functions. Rack mountable.
Good loading basket assembly. Has a tape engage problem. Smaller mechanics intact, head and head bearing may be worn. Missing some hardware. Selling mainly for face, knobs, and jog wheel. Call for more details. Condition: 8
Pinch roller and pinch arm assembly for DAT machine. Used only in stock. Nice condition . Be aware of Panasonic 3700 3800 problem where tape slips out of pinch roller when rewind scan of tape is engaged. It is usually due to spring tension of the pinch roller is weak. The spring is located at the bottom arm end and is difficult to install.
