20"x13.875"x4.25" (slightly larger dust cover). Design with slide in hinges. Clear plastic slightly sun darkened. Very good #8 condition, top cover slightly warped.
Turntable motor with board assembly and wire leads. Marked SFDP03M01 U-994V-1. 7/10 condition, needs repair, possibly its motor.
AC synchronous motor. Has wiring harness attached. 120/240V selector board included. Has original rubber gromet mounts on top plate. Low use, oiled, #9
Motor #SM100-1; 3 3/8"x 1 7/8", 3 mounting stands. #9 condition
Pioneer PL 12-D Monor KXM-015-8 Has motor mount with rubber shock pads, complete wiring harness. Oiled, tested, good. 8+/10 condition.
Check us out on facebook.
Extra strength record cleaner with brush applicator. 2oz bottle with about 1.5oz remaining.
Motor, AM 400 with pulley, #9 condition, salvaged, tested
Motor, AM 400 (missing label) with pulley, #9 condition, salvaged, tested
with harness and connector block. Made in Germany. Excellent condition, tested.
Similar to AM-400. Excellent condition, tested.
Part #: 227 330 / 227 329 ; has original wire harness and original 60hz pulley. Salvage from low use machine, oiled and fully tested. Minor surface rust. Condition: 8
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
#431 10132, Possible 3V - 9V DC Motor, For Use on Turntables (Technics), Clockwise Motor, Needs Outboard Regulator, With Plastic Pulley, Tested OK, Condition #9
Motor #MMN-656K8A with pulley. 9/10 condition low use and tested
MMX-3H2RPA Motor, DC12V. With Pulley. Fully tested, working, with board, connectors intact. Known low use, tested #9 condition.
Complete tone arm with cue elevator and counterweight assembly. With ant-skate side arm weight, no head shell. Arm wire from arm stem is 2" long. #9
Motor. Has original wiring harness and plastic connector housing. (No pulley). Round black motor housing with three mounting bolts. Shaft Diameter 0.058" Oiled, light use but good, #8+ Condition
Phono preamp with RIAA equalization. (This is a Mono Device) , Uses 8-pin socket connector. (1 only) Excellent #9 condition.
To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
MM-6T2RWO Motor with switch and mounting screws. #9 Condition.
9v DC motor, CCW rotation direction, with wire leads, board, and brass pulley. Matsushita MMI-6S9RWH. Excellent condition, tested good.
12v 2 speed pulley, very common version, fits many models. Remove jumper for speed control. From low use, tested. #9+ condition.
can go either CW or CCW depending on polarity of voltage, with brass pulley, tested and lubricated, salvaged #8 condition.
4 speed, 60Hz. Excellent condition. No Pulley.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Smoked dust cover. Hinge pin holes are 12 1/2" space. Truly excellent, very minor scuffs at edge. condition #9-
complete w/ wire leads, round motor axl size pulley, tested, oiled, condition # 8+