Audio Proz Service and Sales


108-3 Power Supply Board

Audio Proz Inv #: 58287

For most basic 12 volt motor systems. #9 salvage.

$ 20  Contact Us  

12v DC power adaptor

Audio Proz Inv #: 43285

Dual 11.6147. Excellent condition.

$ 12  Contact Us  

45rpm adapter

Audio Proz Inv #: 49908

Black color, new old stock part. Seven pieces available.

Note:
This adapter is only for playing 1 or 2 or 3 45 RPMs stacked by hand, and does not "drop" records. For some turntable models, including most Duals, a single play center spindle "stub" is also required. To fit the 45 ring onto that item can cost around $8. If you have any questions, give us a call or e-mail with your turntable brand and model.

$ 2  Contact Us  

6 Hole Headshell with Top Screen Wires

Audio Proz Inv #: 55433

Yamaha and others 6 hole headshell with Top Screen WIres. #9

SOLD  Contact Us  

Contact us about similar items or replacement parts.

9V.12V

Audio Proz Inv #: 59170

For Audio Technica AT-LD2D. 9/10 condition, pulled from brand new turntable. Substitute MMI-6T2RWKO motor

SOLD  Contact Us  

Contact us about similar items or replacement parts.


To inquire about a motor you can show us a picture and/or find model number on your motor.  Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different.  Once the actual look is the same then it is the same motor.  It is true that sometimes the motor rotor develops cracks and can have weak torque.


ADC Accutrac 4000

Audio Proz Inv #: 71760

Automatic electronic control, motor - spins (CALL), good for dust cover (CALL), *arm stiff - horizontal plane  (arm motor has corrosion), arm intact with counterweight fixed head shell (CALL), platter (CALL), matte (CALL), ADC LMA-1 Cartridge proprietary for use with optical sensor stylus/suspension good (CALL), condition #8 (call for pricing info 617-926-8020 12 noon -6pm)

Contact Us  Contact Us  

AIWA LX-100

Audio Proz Inv #: 56112

Tone arm motor and assembly. For linear tracking LX-100. Assembly includes wire, gears, pulleys. Motor # MDN-7R4. 12-volume. Needs belt. Wiring harness intact. Salvaged from working unit. Oiled/tested. 9/10 condition.

$ 28  Contact Us  

AIWA LX-100

Audio Proz Inv #: 56113

Loading tray motor. MDN-7R4. 12-volume. 20 September 82 BA. Has original mounting bracket. Wiring harness intact. Has original brass pulley. Low use, oiled/tested. 9/10 condition.

$ 28  Contact Us  

Akai motor control board

Audio Proz Inv #: 47353

P1021B501A,2A,3A,4A,5A. Excellent #9 condition.

$ 40  Contact Us  

Akai Power Supply Servo Board

Audio Proz Inv #: 57596

P1021B501A, 2A, 3A, 4A, 5A. Salvage from low use machine. #9

$ 20  Contact Us  

Aluminum 45 RPM Record Adapter

Audio Proz Inv #: 70839

(5) available, priced individually. Machined aluminum. Heavy weight. Shows some wear. Condition #8

$ 8  Contact Us  


Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.


American Recorder Audio anti-static record brush

Audio Proz Inv #: 43643

Carbon fiber/velvet. New, several available.

$ 18  Contact Us  

Ampex phono preamp 4010097-01

Audio Proz Inv #: 48142

Phono preamp with RIAA equalization. (This is a Mono Device) , Uses 8-pin socket connector. (1 only) Excellent #9 condition.

$ 38  Contact Us  

AN 6610

Audio Proz Inv #: 62270

For Turntable motor speed regulator. Tested OK. Salvaged, low use #9 condition.

$ 4  Contact Us  

AR motor pulleys

Audio Proz Inv #: 45313

Pulleys for AR turntable motor. Very good #8 condition.

SOLD  Contact Us  

Contact us about similar items or replacement parts.

AR XA Counterweight

Audio Proz Inv #: 55475

Nickel Version. Salvaged from working unit. 9/10 condition.

SOLD  Contact Us  

Contact us about similar items or replacement parts.

AR XA motor

Audio Proz Inv #: 45834

300 rpm, 115 volts, 60 Hz, 1.5 watts. With color code leads attached. Excellent #9 condition.

A note on AR turntables:
We have had many customers write in asking about original version XA AR turntables. We rarely have any complete ARs, because we usually break them for parts - they are worth more in pieces than as complete units. Be aware this design has a number of faults that prevents these from being true audiophile turntables. The original arm cannot track a good quality cartridge (too much friction) and the arm is also too heavy, so that only a basic 2.5 to 3 gram tracking force low compliance design stylus can be effectively used. A modified AR with a new arm, dampened chassis and other mods can be nicer than some more expensive units, but there are plenty of better vintage Japanese turntables that can be had for around $200, that will simply work better with modern quality cartridges. I mainly deal with well-done technology that stays calibrated and is reliable and easy to fix, and most of my customers want a turntable that has auto-return, pitch controls, hinged dust covers, etc. AR were amazing for their brilliant suspension design, but the archaic arm design and motor rumble noise holds these units back unless they've been modified. I am happy to continue to supply parts for these turntables, and if requested I can explain how to modify the arm and suspension to be usable with a better cartridge.

Later version AR ES-1 turntables are superior turntables and the arm is excellent and not to be changed out! Only a correct cartridge type should be installed. 

   
   - Vince

SOLD  Contact Us  

Contact us about similar items or replacement parts.


We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.


AR XA turntable headshell

Audio Proz Inv #: 45141

With wires. Very good #8 condition.

SOLD  Contact Us  

Contact us about similar items or replacement parts.

AT-PL50

Audio Proz Inv #: 59135

(3) dust cover hinges, $14 per pair. 9/10 condition.

$ 14  Contact Us  

Audio Technica AT-LP2D

Audio Proz Inv #: 59171

USB stereo turntable. USB board 405-AT2DUA-2022A. Easy to install wire leads. 9/10 condition, taken from units with very low use time.

$ 20  Contact Us  

Audio Technica AT-PL50 belt

Audio Proz Inv #: 52148

Excellent condition.

$ 12  Contact Us  

Audio Technica ATN 100

Audio Proz Inv #: 72141

Body only, this can fit 78 rpm stylus, see also our inventory #45449

$ 18  Contact Us  

Audio Technica record sweep

Audio Proz Inv #: 61323

Arm with counter weight pivot + rest, missing roller brush, #8 condition

$ 14  Contact Us  


We are a very different kind of shop. To help ensure a smoother experience please read our letter about our current shop policies.

We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock. 

Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.


Audioquest electro stylus cleaning brush,

Audio Proz Inv #: 62187

Battery powered electronic cleaner.  Used in good condition #8

$ 40  Contact Us  

Audioquest Phono DIN Tone Arm Wire

Audio Proz Inv #: 49422

Cable harness. Gold plated. Fits into bottom of arm assembly. #8+ condition.

$ 68  Contact Us