Other models. 18 contact switch with silver cap and wire leads. Salvage. Condition #9
R4-242. Mounted to metal bracket with springs & screw hardware. #9 condition, tested good.
Black plastic frame (6" 2/16L x 13/16" W) excellent condition #9
(2) Available, Priced Each, Black, Locking, 1 unit has sleight staining at bottom Rim, Excellent Condition, Condition #9
(contact us for pricing) two cosmetic side aluminum "ears" (left and right) $28 the pair, Head frame with all parts intact, but heads are 70% worn. (2) Play heads can be re-lapped cost $90 ea, (1) erase head is OK $28, No record head - SOLD, Usable guide posts & head mounting hardware, each head mount tripod $20.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
4 buss fader for PMG. 100k ohm control, uses orange knob (not included). This fader has longer stem which make the knob sit high. (This 100k ohm control fits the same, wires up the same but will not match physical level position of original, just slightly different). suggest to buy as pair PGM faders. #10 new condition. (8) available priced each.
#52101735-02, Tested known to be good, Condition #9
Good Condition, (2) available, belongs to X300-R and Tascam 34 as well, Condition #9
TC-765, TC-755 Capstan Belt, (1) NEW approximate IC 20.25, Condition 10
5720103900, has calibration control illustration attached, minor scuffs - could be sanded/repainted, salvage from parts unit, condition #8+
($14) each, tops only, (10) Available can be used on RT-909, RT-1020, RT-1050 + others, Note:special order custom part, new replica part, condition #10
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
($24) set (1) Left + Right minor chips matched set, (1) RT Only - minor chips ($12) few dents/chips of vinyl veneer, pulled from service unit, condition #8
52101751-00 w/ meter mount bracket, salvage from low use unit, condition #8+
Cuts and trims 1/4" tape, storage in bottom for splicing tape, locking tape guides to hold tape, used good condition #9
Head DeMagnetizer, 2.25" barrel with 1.25" probe nd / probe, AC cord (supply 105-125 volts), original box - orange w/ b+w print, good condition #8+
Ampex 4-Track 7 1/2 IPS stereo, reel and label good condition, cosmetically pristine, previously taped shut, tape shows virtually no run time, Good condition, Condition #9
Contact us about similar items or replacement parts.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
Contact us about similar items or replacement parts.
Shows some fading of aluminium trim with small nick on "S" and rectangle Logo, pulled from parts unit, Good condition as noted, could be painted/sanded to aluminium, #8- Condition
Contact us about similar items or replacement parts.
complete (1/2 track) assembly includes switch board, 4 head, (1/4 track playback head is worn out) but 2 track (1/2 track) play head is 85% good, as it was replaced at one time, 2 track (1/2 track ) record head is 70% good, and heads are in near perfect correct alignment
Control panel. Has all tape function buttons - stop, rec, FF, RW, etc. Tape counter. Complete with all buttons, pitch control, etc. Nice clean, but one minor small spot on face. Condition 8+
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
Needs Cleaning (requires roller to be mounted on recorder and spun to clean the surface) Used Good condition, #8 Condition
Brushed Aluminum, Includes 1 Washer, Good condition, #9 Condition