Open Reel Tape deck. Reel heads of tables good, side panels good #9 condition, heads good - but show some weak (85-90%). Bad motor (Servo Voltage Problem). Main motor is 114-5001 is bad. #7 condition overall
(4) Pinch Roller RE-Rubber(black) # 10 condition $88 each
Head cover: 1 available, #9 condition, $48.00. Side panel: 2 available, #8+ condition, $28.00. Also complete unit but missing play head, record head is #8+ condition, AV mechanics in #8+ condition, dust inside but functional, needs cleaning, call, we could sell whole machine, #8+ condition
complete board, all switch caps, board has crack, salvage, switches must be removed from board, (4 pcs.) simulsync switches on head block board (which has crack), priced as 18.00 each, (3 pcs.) switch caps, are 8.00 each, #8 condition
pinch roller cap - (SOLD), pinch roller w/ 1 washer, condition #8 - $16, right brake band - $18, left brake band - $18, left side tension arm assy and sensors, washers, spring, complete on plate, condition #8 - $48, right side tension arm assy and sensors, washers, spring, complete on plate, condition #8 - (SOLD) left side tension arm (no opto) - $24
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
left db meter RAW-061-0, good bulb. condition # 9
Contact us about similar items or replacement parts.
motor, RMX-033, w/ wire, connect, good condition, has seen low use, condition # 9
Contact us about similar items or replacement parts.
power resistors (specify which ones required)- $12, bake arm levers - $12, solenoids - $12, brake pads band - (SOLD see also item #46940), brake plastic head shroud (silver look) - $16, left side metal trim for tension arm - $12 (#9 condition)
counter - SOLD, pitch control - $12, back panel - $14, bottom panel - $12, auto stop switch and lever complete on board - $18, back panel cup, shroud - $14, 4 buttons for EQ and power - $6/each, side structure aluminum frames - $10 (#9 condition)
Motor and board EM1450. Can be used in Pioneer RT909 and many others. The board may require pully or resistor changes for speed. Tested, low use #9 condition
Contact us about similar items or replacement parts.
Capstan motor with pulley and mounting plate, part # EM1450. 24VDC Counterclockwise. Fits pioneer RT-909. Salvaged, used, good #8+ condition
Contact us about similar items or replacement parts.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
(2) Hub locks 1/4 reels #KWOH00 $88 EACH #8 condition
control front panel, assembly, controls,buttons, boards for logic, faders, display, call fos specific parts ($20 to $48), condition #8
complete head record play erase block ASSY, 4 track heads, frame /guides, all wiring, heads 75% good, with good wear path established with very slight trapezoid wear, later version 4 track head, double guard band can be used in many TEAC, Tascam 4 track, heads can be used in Tascam 3440, 3340S and others, condition #8 (call for information)
Noise reduction card - will break apart for parts, complete board DBX PCB 52101770-01, ($108) VCA, RMS IC, DBX 146732 ($8.00), DBX 146742 ($8.00), salvage low use unit; condition #9 (Note: these boards do come in slight variations of color)
Reel Tables, w/locking spindles, 2 available $44.00 each, used good condition, salvage unit, condition #8,
Reel to Reel Deck for parts or repair. Totally intact, Actually main balt, head and pinch/rollers OK 80% good. Basic dust out, cleaned controls but machines needs lubrication, calibration, etc. Many valuable parts. (Unit uses the small blue main capstan motor IC-624G). Unit in good low wear condition. #7
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Reel table with mounting screws. tables have slight corrosion at spindles, works perfectly. #8
Contact us about similar items or replacement parts.
1/4 Nab Hbs adapter. fit 10"reels very nics locking hubs, very good condition .#9 (1 available ) $88
Reel servo PCB 52101740-01 -Some upgrades done (Replaced R109-4.7 K ohm Resistor R142-22 K ohm) Salvaged from low use unit. #8+ condition (Vinc card for his use)
Contact us about similar items or replacement parts.
Bias Board PCB 52101771-02($68) or Bias OSC 5292204401 ($14) or Master OSC 100K HZ 5292204300 (SOLD). Salvaged from low use unit. #9 condition.
Is head number. Play head/Erase head available, head is 30% worn, needs head lap before sale. Heads are on assembly with pinch arm and capstan. #8 Condition.
(2) Meter T90919 #8+ good bulb (24$). (2) Meter 93.12.16. #9 good bulb (24).
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Take up flutter roller with stem, washers and black cap ($60). Opto sensor board ($22), a few stains #8 condition.
(1) 11 pin male to 11 pin female function cable (24$). 7 pin Din cable, Connects transport to electronics (pre amp),(18$). Heads to preamp cable . Used - good condition. #8+