Open Reel Tape deck. Reel heads of tables good, side panels good #9 condition, heads good - but show some weak (85-90%). Bad motor (Servo Voltage Problem). Main motor is 114-5001 is bad. #7 condition overall
(4) Pinch Roller RE-Rubber(black) # 10 condition $88 each
Head cover: 1 available, #9 condition, $48.00. Side panel: 2 available, #8+ condition, $28.00. Also complete unit but missing play head, record head is #8+ condition, AV mechanics in #8+ condition, dust inside but functional, needs cleaning, call, we could sell whole machine, #8+ condition
complete board, all switch caps, board has crack, salvage, switches must be removed from board, (4 pcs.) simulsync switches on head block board (which has crack), priced as 18.00 each, (3 pcs.) switch caps, are 8.00 each, #8 condition
pinch roller cap - (SOLD), pinch roller w/ 1 washer, condition #8 - $16, right brake band - $18, left brake band - $18, left side tension arm assy and sensors, washers, spring, complete on plate, condition #8 - $48, right side tension arm assy and sensors, washers, spring, complete on plate, condition #8 - (SOLD) left side tension arm (no opto) - $24
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
left db meter RAW-061-0, good bulb. condition # 9
Contact us about similar items or replacement parts.
motor, RMX-033, w/ wire, connect, good condition, has seen low use, condition # 9
Contact us about similar items or replacement parts.
power resistors (specify which ones required)- $12, bake arm levers - $12, solenoids - $12, brake pads band - (SOLD see also item #46940), brake plastic head shroud (silver look) - $16, left side metal trim for tension arm - $12 (#9 condition)
counter - SOLD, pitch control - $12, back panel - $14, bottom panel - $12, auto stop switch and lever complete on board - $18, back panel cup, shroud - $14, 4 buttons for EQ and power - $6/each, side structure aluminum frames - $10 (#9 condition)
Motor and board EM1450. Can be used in Pioneer RT909 and many others. The board may require pully or resistor changes for speed. Tested, low use #9 condition
Contact us about similar items or replacement parts.
Capstan motor with pulley and mounting plate, part # EM1450. 24VDC Counterclockwise. Fits pioneer RT-909. Salvaged, used, good #8+ condition
Contact us about similar items or replacement parts.
Check us out on facebook.
(2) Hub locks 1/4 reels #KWOH00 $88 EACH #8 condition
control front panel, assembly, controls,buttons, boards for logic, faders, display, call fos specific parts ($20 to $48), condition #8
complete head record play erase block ASSY, 4 track heads, frame /guides, all wiring, heads 75% good, with good wear path established with very slight trapezoid wear, later version 4 track head, double guard band can be used in many TEAC, Tascam 4 track, heads can be used in Tascam 3440, 3340S and others, condition #8 (call for information)
Noise reduction card - will break apart for parts, complete board DBX PCB 52101770-01, ($108) VCA, RMS IC, DBX 146732 ($8.00), DBX 146742 ($8.00), salvage low use unit; condition #9 (Note: these boards do come in slight variations of color)
Reel Tables, w/locking spindles, 2 available $44.00 each, used good condition, salvage unit, condition #8,
Reel to Reel Deck for parts or repair. Totally intact, Actually main balt, head and pinch/rollers OK 80% good. Basic dust out, cleaned controls but machines needs lubrication, calibration, etc. Many valuable parts. (Unit uses the small blue main capstan motor IC-624G). Unit in good low wear condition. #7
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
Reel table with mounting screws. tables have slight corrosion at spindles, works perfectly. #8
Contact us about similar items or replacement parts.
1/4 Nab Hbs adapter. fit 10"reels very nics locking hubs, very good condition .#9 (1 available ) $88
Reel servo PCB 52101740-01 -Some upgrades done (Replaced R109-4.7 K ohm Resistor R142-22 K ohm) Salvaged from low use unit. #8+ condition (Vinc card for his use)
Contact us about similar items or replacement parts.
Bias Board PCB 52101771-02($68) or Bias OSC 5292204401 ($14) or Master OSC 100K HZ 5292204300 (SOLD). Salvaged from low use unit. #9 condition.
Is head number. Play head/Erase head available, head is 30% worn, needs head lap before sale. Heads are on assembly with pinch arm and capstan. #8 Condition.
(2) Meter T90919 #8+ good bulb (24$). (2) Meter 93.12.16. #9 good bulb (24).
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Take up flutter roller with stem, washers and black cap ($60). Opto sensor board ($22), a few stains #8 condition.
(1) 11 pin male to 11 pin female function cable (24$). 7 pin Din cable, Connects transport to electronics (pre amp),(18$). Heads to preamp cable . Used - good condition. #8+