Part #JC-00107. CW direction Very good #8 condition.
For editing and splicing 1/4 inch tape. Magnesium body with plastic jewel case. Excellent condition. #9
Wire SPOOL by Webster-Chicago. Hour Spool CAT NO W-175
Yellow background with green scale, approximately 4"x2"x.5". Excellent condition.
115v, 50/60Hz, 1 amp, 1400rpm, clockwise. With mount bracket and reel table hub. Used in very good condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
with brass pulley and board #TK-T134 94v-0. Excellent condition.
Contact us about similar items or replacement parts.
Headcover #9 condition $48, Capstan Belt #9 $12, Function relay board 50484130 $48, Reel motor control board 51670531 $48, Bias OSC Board 51670540 $38, Function button assy (rec, play ect) $24, REC, Meter board $28, Line amp board 5170511 $38, Wood side panels (left or right) #8 or better condition $22 each.
Pitch control switch on PCB # 51679380 (TP-S30-HB) 1 &1/4" long shaft, number 8+ condition
(2) Locking Hubs. Brown/Grey color. 1 hub has worn center. Still work well. Used very good 8+ condition. (priced indvidually. 30 for worn one, 40 for unworn)
7 watt. With motor drive speed board 51675661. Used in many models, probable A3440S and 22-4. Board parts are set for 7 1/2 15 IPS operation but resistor changes can make 1 7/8 3 3/4 etc. 9 condition.
Contact us about similar items or replacement parts.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
For Tascam Model 38 and others (388, 3440, 48, 58, etc). Send a picture of the pulley you need to verify the match. Condition: 9
For possible A7300 or A6100 series. Please include a picture of your part so that we may match it up for you as we are not sure of the model use. 8+/10 condition, pinch roller is 8/10 condition on cast metal arm and pivot usable. OK pinch but rare version.
2 TRACK (1/4 Inch) Rec head for possible use with Pioneer, TEAC, and Technics. 16.5 ohm impedance #9+ condition, like new! Has Base plate for use of 2 screws very typical of japanese Reel to Reel heads
Tape is becoming sticky and will shed, but it's still usable. Good #7 condition.
Contact us about similar items or replacement parts.
Feet. with screws. 16mm. "bracket " design Will fit x1000 and similar units. (priced for the pair) #8 condition.
Special logic IC for Teac X1000R, IC 5220803400, Part probably is good, was salvaged, not certain, Condition #8 (Audio Pro in house use only!)
Contact us about similar items or replacement parts.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
#5534692001 X-7 R. X10, X20, X1000, X2000, A4010, A1200. Custom high spec belt for capstan motor to drive capstan. Original Teac part, new stock.(1) available $24 each.
Good Condition, (2) available, belongs to X300-R and Tascam 34 as well, Condition #9
Most parts are available, please call.
Complete head block assembly with six heads. Heads have about 20% wear with an excellent wear in pattern. It is a good idea to replace all heads at once if some heads are worn out. Very good condition.
Auto spacer control fader. 100KB. With knob and button. #9
Take-up break band. Complete with mounting hardware, spring, break guard and screws. Used. #9
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
VU meter, black background with white lettering. 2 3/4" x 1 5/8" x 5/8". With working meter lamp. Tested and working in excellent condition. #9
Caps for pinch roller with one spacer washer for each. Black, 1 1/8" diameter. 2 available. $18 each.