Glass ferrite, play head. 300OHM with bracket. Head has been special polished to operate at 90% original quality.Some minor recalibration of signal levels may be required. Glass ferrite is very difficult to restore but we use a special process of diamond polish paste and buffing pads which reduces friction on head surface (less oxide drop from tape). Please call us if you have inquiries about this service.
Head cover flip up mech. with 2+4+ switch on top, right. NO TAPE CUTTING BLOCK. Minor scuffs around edges, needs a label removed. Some paint missing on top, easily re-paintable. 8/10 condition.
Marked 52101085-00 TP-S47-T. Very good condition, with some corrosion. Known to have virtually no use time.
Metal reel platters for supply and takeup arm, $88 each. With bullet center spindle design. Excellent #9 condition.
Play, record, erase, and reverse play heads, mounted in original shield chassis with wires intact. Very good condition.
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
Erase head for Tascam 38, 48, 58, with base platform. Excellent condition.
Playback 2 track head, virtual new with hardware mounting platform, salvage #9
Power supply PCB-141 #5210073400 (TP-547-T) Complete board with heat sink and mounting bracket #9 condition
Front panel function push button assembly. With counter cables and connectors. #9
Rront panel board Complete assembly with face, buttons, wire harness. Front panel function switches, pitch, and power. #9+ condition.
Capstan motor with tacho, black square black motor, yellow tacho - tacho attached to unit, capstan 3 3/4 and 7 1/2 ips #8+ condition minor wear
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
022 Model record 2 track head, head was 70% good and is correctly recapped #8
(2) play heads #66904, 1/4 track, A-1200 series decks, new, unused, will work in 2300 & 3300 series TEAC models, condition #10, $88ea
1/4 track stereo. With brass rear mounting screw and shield. Used, relapped, in very good condition.
4T 2CH record head, high density Ferrite, 1/4 track stereo. New old stock!
Complete, mech head assembly with Record, Playback and Erase heads. Heads in 75% + good condition can easily be lapped, obvious little spots, easy to drop in place assembly, very minor scuff on edge. 7 condition.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
11 pin remote control unit. Like new, #9 condition.
unknown model. This NAB hub (10 inch) adapter was designed for pro reel to reel tables to fit onto bullet type spindle when locking metal reel. Only fits older TEAC will not fit OTARI. Heavy duty look, fits only TEAC 8/10 condition
speed 1khz 0db level from count 0 to 600, 1khz square wave at -5db 600 to end of tape, (square wave is an excellent, fast way to head alignment) about 5 minutes of test tones on Ampex archival quality tape on balanced reel
NAB reference 250 NW on ampex archival tape, test tone sweeps 1khz to 14khz, about 10 sweeps of frequencies 0db output if played on Tascam 38 +- 15db accuracy, meters will read 0db and output level will be 0db on professional meter on 0dbv scale, about 5 minutes of tape
on quality balanced reel, NAB reference, 250 NW level test tone sweep 1k to 14khz, if tape played on properly calibrated Tascam 38, meters will read 0db w/ 0db output on pro meter 0dbv scale about 10 sweeps of frequencies, 5 minutes of tape
1/2 track head, playback, #66805. Used, Excellent condition #9+ condition
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Pioneer RT-909 Digital Timer Board. RWX-336, RNP-613. Good #9 condition.
RWX-341-0, RTT-178. 115 volt. Salvage tested good. #9 Condition.