Very unusual, "stealth like" look, black color. Excellent condition.
Bizarre "stealth" counterweight for custom Yamaha turntable. Has three holes to accomodate the back end of the tone arm runners. With small calibrated arm weight. Used in very good #8 condition. This is a very rare counterweight!
#SFDPD2NO1A, Same as many Technics, Spindle cycle gear is cracked, repairable on request, Unit has special AN6639 motor IC, Condition #8 - $28 - Call for availability
Headshell $16, Counter weight $18, Platter mat $14, all items Condition #9,
Dust cover only, no hinges. 16" wide by 12.5" deep by 2" high. Excellent #9 condition, almost new.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
We have many idlers available. To request a part, please contact us with a picture of what you want to replace. Good rubber parts in excellent or like new condition!
2 black, snap position design hinges. Slip in stem. 2mm wide at base, 4mm wider insert to cover. @ small cut holes at base of stem. #9
(2) Available, 1 1/2 inch wide base, 2 hole mount, curved top, 3 hole mount, condition # 9
Light brown. Missing 1 foot. #8 condition.
Walnut base for Dual 1219. Base has been repaired but is slightly off. May not fit dust cover correctly, but the wood look is excellent. Very good #8 condition. Call for more details.
Main power switch for many types of Japanese turntables.
We are a very different kind of shop. To help ensure a smoother experience please read our letter about our current shop policies.
9v DC motor, CCW rotation direction, with wire leads, board, and brass pulley. Matsushita MMI-6S9RWH. Excellent condition, tested good.
For various manufacturers and models. Includes board #N-83 and wire leads. Excellent condition.
with 1 3/8" brass pulley on shaft. Possibly for a Philips turntable. Excellent condition, tested good.
For Audio-Technica and other turntables. 9.12vDC. Excellent condition, tested. We are trying to find alternative motors, please contact for other possible motors.
Contact us about similar items or replacement parts.
#77150. Excellent condition, tested.
Contact us about similar items or replacement parts.
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
3.25"x2.5" outer shell dimensions, with three mounting posts. Includes pulley and color coded leads wired to connector. Very good #8+ condition.
Pair of slot insert hinges used in many modern, inexpensive tables. 1 1/2" by 1 1/8" plate fits into cover, 1 1/4" fits into "T" slot on table base. All plastic construction, black color.
Half moon front, black color. About 1 and 5/8 inches in length. B111940 marked on bottom. Excellent #9 condition.
Counterweight substitute. Looks very similar. Condition #9.
Excellent condition, salvaged from low use machine.
If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
We have many counterweights available for all types of turntables, including Kenwood, Pioneer, Sony, Yamaha, and many more! Most are available for $8 to $20. Please send us a close up picture of your turntable and counterweight and we can supply the correct item.
Wand/Tonearm "pipe." For Thorens TD110, 115 (and others). Includes: Cartridge mount hardware, alignment gauge, mirror. Like new - not used. Missing original outer carton. Condition 9+.