2 Track 1/4" Semi-Pro/Pro Tape Deck. 7 1/2 ips/15 ips. Mint condition heads, slight corrosion on capstan, all control switches cleaned and calibrated. 0db at meters and output control, -10db at output for semi-pro level. Back panel has high/low output at high position.
FYI: A common problem is that the grease on these machines becomes dry wiht time and freezes the pinch arm and tape lifter mechanism. Unfortunately, this requires a major take apart and removal of the auto-stop switches, capstan plate, etc. to oil the pivots. The pinch arm will feel practically welded to the axel and special cutting oils and heat are required to soften the grease and allow assembly to come apart. When they get like this they should really be worked on by an experienced tech.
Contact us about similar items or replacement parts.
1960's era, 4 inch reel to reel, with leather case, very good condition. With origional mic, untested proablly can work with service.
Contact us about similar items or replacement parts.
Dual flutter roller design. Key button operation. Compact 7 inch reel. 3 3/4 and 7 ips. EE setting is Maxell Ampex 456 Standard. Headphone, mic inputs. Heads 90% good. Level control at #7 is 0db. New belts, calibrated. 9/10 condition.
Contact us about similar items or replacement parts.
Open Reel Tape Deck (1/4 track stereo) 2 speed, 7 1/2, 3 3/4 IPS. 7" Reels, Rec EQ + Bias (high or normal), hiqh EQ/bias set for Maxell. 1/4 mic/inputs w/ level control. Tape/source monitor switch, electronic transport. 80% head life left , good shape, unit calibration very good. Has few scuffs on front panel. #8+ condition
Contact us about similar items or replacement parts.
7 inch - 3.75 ips - 2 minor rust spots on face 8.5 condition - 2 minor woodside dings - heads 80% good - Punch #9 - Complete clean and serviced - Maxell UD 7.5 EQ and Bias 1/ 3.75 EQ Bias 2 - late version quiet cue arm - 9/10 Mechanical.
All our machines have been serviced in our shop to be guaranteed functioning and reliable well into the future. They are sold with service logs explaining the work performed on each individual unit. It is important to hold onto these service logs as they will provide valuable information to any tech servicing the machine in the future.
Contact us about similar items or replacement parts.
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
10" Reel Recorder, Auto Reverse. with NAB hub adaptors. Black face version. Complete professionally cleaned calibrated. Heads & Mechanics excellent, recent new belts, like new Pinch. (RC-100 wired remote is available additional $130 Listing # 54640) 8+ condition
Tape heads worn/corroded, bad pinch roller, all switches, controls, and cartridge board connectors are noisy, broken rec level, unit required new heads general clean lube, unit received with bent knobs, possible parts unit, condition #7
new stock motor and board. Possibly available elsewhere NO INVOICE
Contact us about similar items or replacement parts.
1/4 track. Low use time. With 10 inch hub adapters. Heads are 80% good. Set up for Ampex 456. Maxwell UD quality rec, play. 7 1/2 1 ps Bias/ EQ. 3 3/4 Bias 2 EQ2 cleaned twice over. Calibrated, #9 condition.
Contact us about similar items or replacement parts.
3 motor, 3 head stereo tape deck. 1/4 track stereo format. Large/small reel selector, Hi/Lo speed. Left/Right record on/off switches. Bias, EQ STD/LH switches, tape/source monitor switch. 1/4 inch mic ins on face. 1/4 inch phones out. L/R mic, line level controls, L/R output control. Silverface unit with analog counter. Fully serviced and calibrated to Maxell UD 35/Ampex 456. Head 80% good. Speed runs 1/2% high by design. Modification to Rec Bass EQ to nicely improve deep bass response and tape / drive levels. Big VU meters, now has hub adapters (9/10 condition), has original manual and schematic. 9/10 condition.
6011022000. NEW STOCk (2) pcs. available price is for each roller. (Original paperwork is missing, must investigate if more parts available)
Contact us about similar items or replacement parts.
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
Reel to Reel recorder, all serviced cleaned, calibrated. Excellent condition mechanically and cosmetically.
Contact us about similar items or replacement parts.
Remote cable 28 feet. 24 pins. 9/10 condition.
revox b77 reel to reel 1/4 inch track stereo tape machine. excellent condition heads, has power supply updates/mods. Super quality machine; heads are 90% good or better.
All our machines have been serviced in our shop to be guaranteed functioning and reliable well into the future. They are sold with service logs explaining the work performed on each individual unit. It is important to hold onto these service logs as they will provide valuable information to any tech servicing the machine in the future.
Contact us about similar items or replacement parts.
Remote control unit, Auto locate/remote for 16 track recorder with 15ft cable (db25 connector), factory reconditioned, excellent condition (like new)
Contact us about similar items or replacement parts.
Excellent condition, remote control unit
Contact us about similar items or replacement parts.
7 inch reel size, 3 speeds: 7 1/2, 3 3/4, 1 7/8. 3 aux inputs, 1 mic in, mini jack, 3 heads. Echo/Sound On Sound. With dust cover, noise suppression very nice. Real wood case, new start/rim cap. All controls cleaned, all mech oiled. Good rubber! Unit in #9 condition, heads/mech, excellent condition. Heads 10 to 15% worn. All calibrated to Maxell tape. 406 Ampex.
A little bit of advice on old analogue equipment: controls like knobs and switches are mechanical devices in themselves and so require some specific care. These parts operate on metal (usually carbon) runners which can wear and corrode. Whenever working on a machine, we thoroughly clean and lubricate the controls, often 2 to 3 times over until clean. They can be difficult to successfully clean on some old equipment such as tube designs or even more recent machines that come from a smoky or moist environment (even proximity to major highways where there is a higher concentration of sulfur oxide and carbon oxides). These conditions can be more corrosive or staining to metal switch parts, making cleaning difficult but absolutely crucial.
After returning a serviced unit to a customer, the cleaners remain active for about 2 weeks, so we recommend the controls be exercised occasionally to work in the cleaner. In general it is a good rule of thumb to exercise these controls at least once every 2 or 3 months just to keep the contact buffed.
Contact us about similar items or replacement parts.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
Contact us about similar items or replacement parts.
1 inch tape, 24 recordable tracks, DBX, RCA ins/outs, #9 condition, great condition with original box and packing, fully cleaned and serviced with 80% or better condition heads, fully calibrated to modern industry standards. New lower price! repair of minor problem in motor
Complete with rubber, bearings, springs, washers, cap. Used in excellent #9 condition.
Contact us about similar items or replacement parts.
Auto reverse 2 v/u meters. Mic and line in record with dual gang level controls. Tape and source monitor selector. Meter high/ normal, EQ, Bias, Left/ Right. Record on/off switches. 3 3/4 high bias tracks extremely well fully cleaned/ calibrated. EXCELLENT condition. Low hours use machine guaranteds. #9+ Condition. Near perfect heads.
Contact us about similar items or replacement parts.
We can make calibration tapes for 1/4 and 1/2 track machines on brand new tape. Just drop us an email request at sales@audioproz.com and be sure to include you model number.
New. Includes all mounting hardware. RP 102-2902D
Contact us about similar items or replacement parts.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
Original. Connects to back panel of 80-8 with 11 pin connector for DX-8. Repaired in #7 condition.
Contact us about similar items or replacement parts.
1/2 track Record & play, 1/4 track play only. Excellent condition, virtually no use time. 15 or 7 IPS. With phone jack and mic inputs. Excellent record and play performance, 20KHz+ response. Excellent wow and flutter specs. Professionally cleaned, serviced, and calibrated. Bias 1 for Maxell UD 35, XLI 996, 499. Bias 2 is a slight under bias, 2db HF rise.
