With 9 units of 411 cards. #9 Condition. Not serviced.
Phonograph de-click and pop reduction device. Rack mount, Rev 5 modification, TLO75 Op amps, Nice Face. condition #8+
Contact us about similar items or replacement parts.
Multiband Denoiser, 2-Channel Single-Ended Noise Reduction System. Multiband frequency analysis and processing. TAC (Transient Attack Control) dynamic filters respond accurately to signals with fast attacks. Auto-filter circuitry for automatic sliding filters. Integrated IRC expander circuitry. Adjustable cut-off frequency and release time. Noise reduction of up to 80 dB. Dual-mono or true stereo couple function.
Noise Reduction, 2 rack space, Modified by AP to reduce hiss very carefully without excessive high frequency loss. Works well on tape and FM signal, 4136 opamp gives slight tubaphonic veiled sound. A somewhat archaic device but still usable as a substitute Dolby decoder or to warm up the audio character of excessively bright recordings.
Contact us about similar items or replacement parts.
Noise reduction system, 2 rack space, 4ch, all RCA in/outs. No rack hardware included.
Contact us about similar items or replacement parts.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
w/10x411 Modules, the power chassis get $100 plus alone, each module if sold separately gets $80-$120. Our shop owner might make a dial for the complete unit, it is low use equipment in storage for many years that came out of the shop owners personal studio and in total is in B+ condition.
Silver Face, Practically mint condition Dolby C noise reduction
Contact us about similar items or replacement parts.
Noise reduction system, 1 rack space, 2 channel noise filter, XLR in outs phone in/out. Used as AP engineering sample.
Noise reduction module, accessory for 80-8 tape recorder, bag, manual, 16 RCA cables, no warranty card. Known to be in good condition. This unit is priced on request depending on service required. $250 (Tested appears to work, minimal repair, clean up time is spent) - $400+ range (Full restoration everything repaired, all relays cleaned (there are 16 of them!!) tested, calibrated, etc.) These are 30 years old, it is almost a requirement to really perfect. Once serviced correctly these are very reliable and great performing machines. We also do a modification in the circuit which reduces the circuit noise another 4 to 6 db and also reduces the crosstalk, simulsync, playback at high frequency by almost 10 db. A significant improvement. $160 for the modification.
Contact us about similar items or replacement parts.
Decliner Noise Reduction, 2 Rack Space, input level matching, RCA Jacks, 2 channel, simultaneous encode/decode
Contact us about similar items or replacement parts.
Noise Gate. Box, Packing, Manual. 1/2 Rack Space. Accessory pack.
Contact us about similar items or replacement parts.
We are a very different kind of shop. To help ensure a smoother experience please read our letter about our current shop policies.
Compressor, Dynamic Range Enhancer, Noise Reduction system. Front panel features: Above threshold/linear switch, level adjust, compress/expand ratio control, pre/post enhance, rec/play/bypass selection, tape/DBX disc selection, play level match control. Unit designed for cassette or reel to reel. Excellent cosmetic condition. Completely cleaned, serviced, and calibrated.
Rack unit, equipped 8 DBX411 units. Equipped with 8 DBX41 units. 8 RCA Rec i/o. 8 RCA rec i/o. -3 RU. 7+ Condition, all modules tested and calibrated QC'd. Needs TLC upon purchase.
De-Esser with rack ears
Contact us about similar items or replacement parts.
For 900 series racks. #9 Condition. Tested, calibrated.
For 900 series racks. Type II noise reduction. 2 Channel encode. #9 Condition.
intact but needs repair, selling for parts or a rebuild
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business. We strive to offer good products at competitive prices. While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run. We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Type II tape noise reduction system. LED metering.
Contact us about similar items or replacement parts.
Classic Mid 70s teac noise redux w/dolby, hooks up between tape deck and receiver/preamp, super spec calibration, excellent fidelity
Contact us about similar items or replacement parts.
Professional, all purpose, single ended noise reduction system with TAC dynamic filter and auto filter. (sn:61066704)
Contact us about similar items or replacement parts.
Single space rackmount stereo tape noise reduction system. Has switching and jacks for two tape decks, including bypass and dubbing. Record and play level controls. Unbalanced and RCA phono connectors. Serviced, cleaned, and tested OK (rack ears added), in mint condition with original box and packing.
Contact us about similar items or replacement parts.
Basic DBX noise reduction system
Contact us about similar items or replacement parts.
Click and Pop eliminator, excellent condition, modified - call for details
The TNE is rackmount and in like new condition, but I only sell the Audio proz modified version. (This is a highly in demand piece that usually has a waiting list) This mod makes the unit work remarkably better. The same is with the 1201A, which is in a slightly worn condition, but certainly very acceptable. This unit also has a modification. See our listing # 60892I was the chief line tech and production assistant at Burwin research and even though my modification is simple and clever, it took a year to design. I myself was desperate for a better, wider applicable performance. The unit works better with many phono preamp cartridge combinations. I do prefer Stanton and Audio Technica cartridges because these guarantee honest bandwidth and correct stereo separation which is critical to best nick pop elimination. The Stanton 680 or 681EEE or AT 311 EP or 440ML is excellent. Indeed the ART phono preamp with proper cartridge loading switches and level control will optimize the TNE performance. I am on the side of laboratory standard ideals and not audio-“phoolish”, intentionally off RIAA standard preamp designs, which can be sometimes interesting sounding, but is usually just strange equalization tricks to impress the consumer. In my opinion its best to have an out board equalization to fix the many and varied equalization “opinions” existing on the stereo-mix of the record. See all about the complete TNE mod service here: https://www.audioproz.com/AP.php?Article=46
Contact us about similar items or replacement parts.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Phonograph nick and pop reducer. Does not have preamp. INR SYS INVERT/DEFEAT, TAPE MONITOR, SENSITIVITY FADER. AP mod done to improve control calibrating and sensing and filtering the pop or click. Also board has been ruggedized with solder and better caps in power supply. Black brushed aluminum face with wood sides. Minor modification to sensitivity control to lessen audible blanking of audio. Fully serviced, low hours use. 9 + condition. It works good but TNE or Burwen 7000 is a superior design and with my mods it's as good or better than any computer attempt. I worked with Burwen and have upgraded a superior TNE. I am a little famous for this as well as APT products.
Contact us about similar items or replacement parts.
8 channel rackmount unit with DBX 410 noise reduction modules. RCA in/outs and multipin connector. Condition: 9