Inter idler driver rubber assembly, complete with gear and idlers. Very good #8 condition.
Part 71051260 Motor with pulley. Excellent #9 condition.
Motor 71051061, 70209-E. With removable metal pulley. Same as 4-527T, 09300B, 80221-B, 5572332, 70203-C, 12V. CW tested OK. #9
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Used in excellent condition. Please show us a picture of your motor if you are looking for a replacement.
For model CR-1A and others. Highest quality Matsushita substitute motor (#MMI-6A9HK DC9V, CCW) with two diodes to convert to 12v operation. Simply put leads at diodes. #9 Condition
Motor with wires. Very good condition.
From salvaged machine, guaranteed perfect condition.
counterclockwise direction motor with black plastic pulley and lead wires. Excellent condition, cleaned, serviced, tested.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
12vDC, with mounting plate and rubber bushings. 7/16" shaft length. Excellent condition.
with aluminum pulley and mounting screws. Excellent condition.
Handheld device to bulk erase 7"-10" reels and cassettes. Used, excellent condition.
1800RPM, 120V, .125A, 3 wire (red, black, yellow) with fan. Condition #9, known no use.
This is metal articulating arm with plastic platform with all springs, pads, but rubber is bad. Fits all Nakamichi 480/580/680 series decks. This is the standard design #8 condition. The required rubber tire is our web listing # 48209
(2) Motor MMA-6B2LWA. Tested. Low use guaranteed. Condition #9. Price is per each.
We are a very different kind of shop. To help ensure a smoother experience please read our letter about our current shop policies.
4 wires, plastic pulley. Tested low use, 2 available condition: 9
2 wires, attached gear and mount. Tested and working, in excellent #9 condition.
4 wires attached to a brass pulley. Mounting screws included.
4 wires attached; brass pulley. Mounting screws included. Tested and fully functional. Condition: 9
with 2 wires, spindle, and mounting hardware attached. Oiled and tested. Condition: 9
DC 12v 13JUN84AC. Has original nylon pulley, wiring harness intact. 9/10 condition, salvaged low use, oiled/tested. CALL SO WE CAN FIND MOTORS WHEN REQUESTED.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
9V motor. 4 wire connectors with removable black pulley. 9+/10 condition, tested okay, used but practically mint.