with aluminum pulley and mounting screws. Excellent condition.
Handheld device to bulk erase 7"-10" reels and cassettes. Used, excellent condition.
1800RPM, 120V, .125A, 3 wire (red, black, yellow) with fan. Condition #9, known no use.
This is metal articulating arm with plastic platform with all springs, pads, but rubber is bad. Fits all Nakamichi 480/580/680 series decks. This is the standard design #8 condition. The required rubber tire is our web listing # 48209
(2) Motor MMA-6B2LWA. Tested. Low use guaranteed. Condition #9. Price is per each.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
4 wires, plastic pulley. Tested low use, 2 available condition: 9
2 wires, attached gear and mount. Tested and working, in excellent #9 condition.
4 wires attached to a brass pulley. Mounting screws included.
4 wires attached; brass pulley. Mounting screws included. Tested and fully functional. Condition: 9
with 2 wires, spindle, and mounting hardware attached. Oiled and tested. Condition: 9
DC 12v 13JUN84AC. Has original nylon pulley, wiring harness intact. 9/10 condition, salvaged low use, oiled/tested. CALL SO WE CAN FIND MOTORS WHEN REQUESTED.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
9V motor. 4 wire connectors with removable black pulley. 9+/10 condition, tested okay, used but practically mint.
Comes with Nylon Pulley. ( Same as EG-530 KD-2B M-09Z12U36C-6 Same as MMI 6H2LWK ) Used very good condition and tested . #9 condition
with spring and clip. Rubber tire is hard but can be rebuilt/ replaced. used in 480,580 series cassette recorders, used salvaged part. This item needs new rubber... this is a metal arm to plastic platform with all springs and felt. This is the standard design. #7 condition. The rubber tire is required is our listing # 48209
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
W/ Brass pulley, 220uf/16v rubicon cap soldered to terminal board, (Matsushita motor MMI-5B9LA) used good condition, salvage unit #9
cassette transport with capstan belt and motor, tested good, uses plug in connector, needs counter belt, left side recording deck with motor #MM1 6HLWK, heads mechanic, minor wear, condition #8
transport. Sankyo motor. SHW2L 00.1219A. Good heads, needs new belts but in good shape. 8 condition.
Good for complete parts meters, pinch rollers, head motors ect.
Motor with wires and pulley. Excellent condition.
For DA-88 and other DAT machines. With pulley. New.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Stereo double auto reverse cassette deck for parts. Only left side deck inside available, all boards intact. IC: HA12088NT, LB1416. Motor MMA6b2LWHX. Needs new belts.