12V Counter Clockwise, manufactured by Sanko. Salvaged from used machine, tested oiled low use. #9
For Fostex, Tascam, many others. 45mm total length. Excellent condition.
Part # MM1-652LK, tested and working, has been oiled, #9 condition.
Contact us about similar items or replacement parts.
Part # MM1-6A2LKPA, oiled, tested and working. Condition: 9
Contact us about similar items or replacement parts.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
Motor with brass pulley. Salvage. Test good. Condition #9.
Transport Motor MMA-6B2LWFC. Head cycling gear cracked. Good for motor, pinch rollers, idler, tape head, gears. No belt. Low use, 90% good head, #9 condition
Contact us about similar items or replacement parts.
Head cycling gear cracked. Otherwise good for motor, pinch rollers, idler, tape head. No belts. Low use head worn 80% good. 8
Vintage cassette deck,, Single large VU meter. CrO2/Reg(normal) tape switch. Dolby B noise Red No/Off (first Cassette Deck to use!) and Stereo/mono switch. Note: Missing Pinch rollers +arm (sold) unit can be used for many parts or restored. Nice plexi cover, has chip under right corner. Used, #9 good condition.
1.5" diameter, felt pad and nylon wheel. Very good condition, five pieces available.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
7/8" diameter. Very good condition, two pieces available.
Six knobs. (1) 7/8" diameter, (2) 11/16" diameter, (3) 3/8" square. Excellent condition.
about 2" diameter, shaft length .5". Very good condition, three pieces available.
for ff/rewind, one black, three silver. Excellent condition.
7/8" diameter, rubber tire on base, excellent condition. Four pieces available.
2.75" square. Excellent condition.
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
motor XMI-6B2HW, CCW motor, 2 available, w/white removable pulley, tested, low use, condition #9
100KAX2. With knob. 9/10 condition (like new).
Could be "5R2" or "5B2." Pulley included. Salvaged from low use machine.
Parts machine, CrO2/CH/Fe-Cr/metal tape selector. Dolby B-C noise reduction. Remote punch-in control. 3 head automatic demagnetizing system. Silver face, tape counter. Rec/play, auto-rewind, mic inputs, tape monitoring. Tape counter belt replaced, cleaned/calibrated, low use hours, 8+ condition.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Pinch roller 9/10 condition $16. Drive Idler 9/10 condition $16. Head 8+/10 condition $16.
Faceplate 9/10 condition (one dent) - $14. Dust Cover with hinges 8/10 condition (minor scuffs) - $14.