12V Counter Clockwise, manufactured by Sanko. Salvaged from used machine, tested oiled low use. #9
For Fostex, Tascam, many others. 45mm total length. Excellent condition.
Part # MM1-652LK, tested and working, has been oiled, #9 condition.
Contact us about similar items or replacement parts.
Part # MM1-6A2LKPA, oiled, tested and working. Condition: 9
Contact us about similar items or replacement parts.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
Motor with brass pulley. Salvage. Test good. Condition #9.
Transport Motor MMA-6B2LWFC. Head cycling gear cracked. Good for motor, pinch rollers, idler, tape head, gears. No belt. Low use, 90% good head, #9 condition
Contact us about similar items or replacement parts.
Head cycling gear cracked. Otherwise good for motor, pinch rollers, idler, tape head. No belts. Low use head worn 80% good. 8
Vintage cassette deck,, Single large VU meter. CrO2/Reg(normal) tape switch. Dolby B noise Red No/Off (first Cassette Deck to use!) and Stereo/mono switch. Note: Missing Pinch rollers +arm (sold) unit can be used for many parts or restored. Nice plexi cover, has chip under right corner. Used, #9 good condition.
Cassette deck. Pinch roller good. Better version unit. Hinged dust cover added. Nicely done by customer. Walnut veneer base. (FF/REW) works. No service. 80% good heads. Excellent cosmetics. Rubber bad! New rubber belt kit needed. Condition 7
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
1.5" diameter, felt pad and nylon wheel. Very good condition, five pieces available.
7/8" diameter. Very good condition, two pieces available.
Six knobs. (1) 7/8" diameter, (2) 11/16" diameter, (3) 3/8" square. Excellent condition.
about 2" diameter, shaft length .5". Very good condition, three pieces available.
for ff/rewind, one black, three silver. Excellent condition.
7/8" diameter, rubber tire on base, excellent condition. Four pieces available.
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
2.75" square. Excellent condition.
motor XMI-6B2HW, CCW motor, 2 available, w/white removable pulley, tested, low use, condition #9
100KAX2. With knob. 9/10 condition (like new).
Could be "5R2" or "5B2." Pulley included. Salvaged from low use machine.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Parts machine, CrO2/CH/Fe-Cr/metal tape selector. Dolby B-C noise reduction. Remote punch-in control. 3 head automatic demagnetizing system. Silver face, tape counter. Rec/play, auto-rewind, mic inputs, tape monitoring. Tape counter belt replaced, cleaned/calibrated, low use hours, 8+ condition.
Pinch roller 9/10 condition $16. Drive Idler 9/10 condition $16. Head 8+/10 condition $16.