Engineering model, modified-rev 6, unit has updated board installed-RP282 to RP583, dynamic eq bias/channel tracking within +/-2dB, assymetrical RMS/detector circuit installed, logarithmic slope detection, PS modifications/head room and noise mod. Calibrated +/- 1db channel to channel. Too much to list, call for details.
Heavily modified by Vince. 7 new switches, overdrive control, combo mic pre/comp/eq with many added features. Low noise high gain tube modification. 2 Band Bass/Treble. Front panel paid gain/phase switch. Tape saturation control. Smooth fast compression switch. High gain / bright switch. Power supply ground mod. Transformer EQ optical mod. This is the cats meow! Call for details 617-926-8020. Top flight cosmetic condition #8 with just a tiny bit of rack rash. Some additional information customers have asked about: This unit is 90% all tube, the op amps are for RMS, DC control, balanced out not audio! What I do is make the circuits have more head room less noise better tube character and more correct RMS detector tracking. As you may have noticed the output circuit clips badly and is nowhere close to semi-pro level. It's a wrongly done balanced line op amp stage. Also the compressor threshold and ratio controls are too sensitive, as such the unit can go into a strange and not very likable distortion if pushed. There is some good basic design circuits in this, but just not enough. My mods are not about installing fancy parts it's about improved circuit performance
Vinc -Audio Pro Modified for enhanced, adjustable tube dynamics with controls on front panel. Stereo tube compressor XLR or phone in/out, -10/+4dBm switchable, Extremely accurate calibration; channel to channel is only +/- 1dB over 60dB range of operation. Also installed highest quality Behringer OT-1 output transformer. This unit has tube harmonic equalizer circuit installed, does variable 2nd harmonic adjustments. (is our shop engineering sample for variable true tube harmonic equalizer effect). #9 Excellent condition, no box, unit warrantied.
Tube mic preamp/compressor/equalizer. AUDIO PROMODIFIED: Tube Harmonic T. H. E. Bias control transformer in Vactrol EQ Mod. Highly recommended, Super noise spec machine! QC, Test All. #10 new in box
Quad compressor/limiter. 4 chan (2 linkable in pairs) comp/limiter. Lo-pass filter, sweepable 20hz-20khz. Compand, threshold, ratio, gain, attack, release, and limit knobs. Optical, link 1/2 (3/4), auto and bypass switches. 10-led metering of gain reduction. XLR and 1/4" in/out with side chain input. Nice performance, good build quality! #9 condition with some minor rack rash. With manual.
Eight channel analog controlled dynamic processor, full function compressor and noise gate. Excellent #9 condition, one knob missing to be replaced with nonoriginal. Professionally cleaned, serviced, and tested.
Stereo tube compressor. Super spec noise and calibration unit with minor AP-modifications of critical tube selection and internal calibration to allow "warmth control" to create in phase or out of phase perfect second harmonics of . 2 to 1%. (Warmth meter will now read lower than original. ) Noise mod in power supply. Excellent condition.
Stereo/2-chan compressor/limiter/noise gate. High spec spectral noise gates. Balanced XLR in/out, balanced 1/4" in/out with side chain. All controls and switches cleaned, all functions check ok! With Manual. #9 condition, minor rack rash.
Unit has super spec controls. Two channels of expander/gate and compressor/limiter. Two 12AX7 tubes to add harmonic character. Both channels track within 0. 5 db of each other! Up to 60db range of compression. Modified for more pleasing 2nd order harmonic enhanced sound. Demo unit, with box, packing and manual. Please call for details.
Limiter, Ducker 2 channel, true balanced IC socketed op amp design. Uses Valley People VCA modules. Calibrated. Low use unit from Shop owners studio, No Rack Rash. #9 condition
Limiter Compressor, 2 ch. Slave switch/external detector, RF earthing cap, minor upgrades, excellent condition. #9 Unit with Valley People VCA Modules---NPW Probably SOLD Similar unit available
Demo, compressor/limiter/expander/gate, 2 channel, XLR and 1/4" ins and outs, original like new, better built, better performance, excellent high accuracy compressor, channel matching for tracking is superb
Units vary in retail cost due to condition. Real nice, modified, low use units get more money. The simple fact is this era design compressor is the same as the DBX XT !! But I modify many designs with more R. F. I. Suppression and less R. M. S. Detector noise getting into the audio V. C. A. (check the internet if not familiar with the abbreviations) Simply put, mods make a slightly cleaner, better accuracy and control of compression of the audio signals. This is done to accommodate today's higher quality signals from microphones and the intense dynamics in modern music.
**We want to be your Behringer dealer! After being among first to champion this great manufacturer, we are offering our most competitive pricing to be your Behringer supplier. **
Dual compressor, expander gate w/ compressor limit threshold output level, uses Valley People VCA modules, phone in and out, process loop in and out, new control installed.
2 channel Compressor, one of the best. Modified P. S ground and shields on VCA, with Rack ears. Super high spec Calibration. Low use, all cleaned and calibrated. #9 condition +- . 5db over 80 db range compression
"Really Nice Compressor," with controls for threshold, ratio, attack, release, and gain. Bypass and "super nice" switches. The RMS digital detector circuit in this unit causes chattering and gulging noise in the audio, especially at low threshold settings. We modified the circuit to improve the audio quality and give the threshold control better range. Unit is now more accurate, releases fast and consistently, and compressed voice of instruments is cleaner and more detailed with subtle dynamics. Like new condition, with power supply and manual.
Vacuum Tube Processor, 2 channels, Gate/Expander, Comp/Limiter and Warmth controls, Ultra-low noise, QC check ok: all switches match with 1db on both channels
This is the older, more well built version compressor, actually a DBX 166 or 160x design (licensed to Behringer), with all controls and switches done better. I also correct a design flaw in these units (there is some sonic distortion and crosstalk of the controlling voltages into the VCA) and improve the power supply decoupling. Vince personally uses one of these units in his synth studio for final mix.
Stereo Compressor/Gate in near mint condition. 2 channel compressor w/ channel link, each channel features input gain, gate threshold, attack, release, ratio, threshold, output gain, and gain reduction meter. Back panel features: Balanced I/O, RCA I/O, Side Chain I/O. Unit has seen low hours of use and it shows. It has excellent calibration channel to channel and is more of a volume ranging compressor as it does some "make up" gain automatically when compressing. Completely cleaned and calibrated.
Fully featured gate with low and high cut eq filters, ducking, and dual/mono function. XLR and 1/4" in/out, with key ext 1/4" in/out. #9 condition, fully tested and cleaned. Discontinued, hard-to-find model.
Rear input level adjustments 220/330/650/1000/1350, front panel on/off w/ green LED CX indicator, RCA left and right ins/outs, good condition, silver face, dent on right side edge, condition # 8
