Audio Proz Service and Sales

Category:

Turntable Parts

1
2
3
4
5
6
7
8
9
10

( 849 Turntable Parts sorted by Price High to Low.)

Dual or Garard Turntable AC Power Cord

# 40603

4 Pin Plug, 6 foot cord

$ 12

Elevator arm

# 60481

Elevator arm assemblies for Japanese style turntables (usually a half round plastic with a metal stem near arm pivot). Customer must send picture of turntable and current arm rest elevator to ensure we provide the right style arm rest. No reply will be made without requested info. All arms are used, salvaged from other machines, fully in tact, nice, clean #9+ condition.

$ 12

Kenwood KD48F

# 62079

Platter Matte (2 available) 11" Diameter. Cut outs near outer rim for sensing size (9/16"L x 5/16"W). Used, #8 good condition.

$ 12

12v DC power adaptor

# 43285

Dual 11. 6147. Excellent condition.

$ 12

Technics SL-3 Belt

# 61243

Spec out #9

$ 12

BIC turntable cam 3.5"

# 45384

Red gear, 3. 5" diameter. Very good #8 condition. Three pieces available.

$ 12

Garrard SPG3

# 61736

Stylus pressure gauge, 0-5 grams, 1/2 gram intervals. With original box + instruction sheet. New old stock, some water damage to outer carton & label. #9 condition.

$ 12

BIC 940/960/980 arm stand

# 45888

Complete arm stand for Bic 900 turntables, with mounting nut and washer. Excellent #9 condition.

$ 12

Dual or Garrard AC power cord

# 46498

For Dual 1219/1229/1209/1215, and others. Four pin connector only, using three wires. Black color. Excellent #9 condition.

$ 12

BIC Single Play Spindle

# 70893

Use for a single 33 play record. This spindle is a short spindle with rubber stop collar. Custom made with spacer grommet. Works like original. Fits BIC 920,940,960,980 1000 models 3 Available Excellent condition #9+ condition - $12/ea

$ 12

Technics SL-B30 rubber mat

# 47571

For platter. Very good condition.

$ 12

Technics SLB-500 shockmount foot

# 47775

Very good condition.

$ 12

Dual or Garrard power cord

# 47804

4-pin power cord for Dual or Garrard tables. Two 120v AC in and one ground. Excellent condition.

$ 12

Philips GA-212 GA-312 main switch

# 48635

New version push button switch for Philips 212 and 312 models. Nickle/Chrome button, silver mounting hardware. Mounts on turntable plate hole using included nut and washers. Chrome nut will be visible but looks good. Requires four leads to be soldered on to switch posts, includes wiring diagram. It looks and fits nice, as good as it gets! I've sold 40+ with no complaints. (8) pieces available. Typically $4 to ship anywhere in USA.
Vince has noted that unfortunately there is no original switch available, these were notorious to break too easy because of plastics manufacturing.

$ 12

Stanton H4s v2 head shell

# 49236

Professional DJ head shell with mounting parts and 2 and 4 gram weights. New.

$ 12

Sony PS-LX220 platter mat

# 49978

Black color, excellent condition.

$ 12

Garrard Z 2000 B

# 50654

Arm stand lock gold stand chrome lever #8 salvage

$ 12

Dual

# 50719

Arm holder and clip, model unknown 1 5/8"HT x 5/8"W x 4/8"Depth (mounting Screw 1/2") with clear plastic clip

$ 12

Dual

# 50720

Acrylic prism Glass model unknown, for viewing strobescope 5/8"HT x 5/8" W x 14/16"Deep Has circular raised (mounting base 5/8"Diameter X 3/16" HT) #9 Condition- No Scratches looks New!

$ 12

Dual 1015

# 50725

Arm stand clip, metal clip #9 salvage

$ 12

Dual 1019 Style

# 50730

Not certain of exact model, black with black lock, 3/4" wide, 1 3/4" total height

$ 12

Pioneer PL-4

# 50773

Strobe light and black assx, mirror. 8+/10 condition.

$ 12

Technics SL-B202 auto cycle spindle

# 51289

Includes gear, excellent condition.

$ 12

BIC power transformer #Z98-326

# 51320

For 940/960/980, possibly others. Includes mounting bushings. Excellent condition.

$ 12

Bic 980 rubber suspension mount

# 51326

Set of four. Excellent condition, supple and pliable, no cracks. Four sets available.

$ 12

Audio Technica AT-PL50 belt

# 52148

Excellent condition.

$ 12

Technics SL-B200

# 52241

Rubber feet w/mounting screws, 4 available, #9 condition

$ 12

Dual 1214

# 52381

Counterweight, minor scuffs, condition #8

$ 12

Bic 940, 960 & others

# 52903

Edge clamp for dropping records with flip clip, black, condition #9

$ 12

Technics SL-BD27

# 53294

Turntable belt. #9 condition.

$ 12

BIC 940 960 AC switch V3-1123-D8

# 71726

With wires and capacitors attached complete. (Used in other model turntables too) #9 unused condition

$ 12

DUAL 1237 Spring for Auto Cycle

# 54828

$ 12

DUAL 1237 Arm Elevator Stem Lifter

# 54832

Black. 2" length

$ 12

DUAL 1237 Counterweight Thumbscrew

# 54837

Aluminum, 1". Condition #9

$ 12

Dual Power Cord

# 54882

4 pin plug(1" wide), 6' long, with two AC wires and white ground wire. #8+

$ 12

Dual Power Cord

# 54883

4 pin plug, 1" wide connector, 6' long. Two AC wires and white ground wire. #8+

$ 12

Dual Power Cord

# 54884

4 pin plug, 1" wide connector, 6' long. Two AC wires and white ground wire. #8+

$ 12

Pioneer PL-112D and others

# 54954

Platter spindle, has nylon toothed jacked, has brass bracket, #9

$ 12

Pioneer PL-112d counter balance weight

# 54959

Has original set screws -brushed aluminum finish -3. 5 x 1 inch cylinder

$ 12

KLH Model Eleven and others

# 55135

Cream color control knob. Has position indicator on faux wood grain insert. 4 available, #9 condition. $12 each.

$ 12

KLH Model Eleven

# 55137

Hinges. Base mounted hinges, the half that mounts onto the base of the turntable. #8

$ 12

Drop spindle and single spindle for KLH model 20, 24, and many others

# 55421

Will also work with all Garrard turntables. Condition: 8

$ 12

Technics SL-1200 MK 2

# 60385

45 RPM adapter. #9 condition

$ 12

Pioneer PL-230 Spindle

# 55663

Spindle mount, spindle plastic gear, intact assembly, original mounting, screws included, salvaged from low use unit. Condition: 9

$ 12

Philips

# 55835

(more can be available, none in stock presently) LDR on PC board. HA31410, RR5852PC, 8204 053 54014. Circular type mounted on original PCB. Salvaged, tested good. 9 condition. $12 each.

$ 12

Dual CS 616 Q

# 55836

Switch and solenoid. Little tone arm switch with original wire harness (Red). Salvaged from working unit. 9 condition.

$ 12

Scott PS-59

# 55895

Dustcover. Clear plastic. Marks and scuffs on top, can be polished out. 7 condition.

$ 12

Circuit board

# 59572

For IC M51724P, SONY 065B ($12. 00 each) Salvage. Condition #9.

$ 12

Sanyo & others

# 56441

Motor pulley for many Japanese belt drive T. T. Fits 2. 5 mm shaft. 33, 45 speed. These appear to fit both Syncronis motors as well as D. C. Control motors. 9 condition.

$ 12

Pioneer, Sansui, Kenwood, Others

# 61969

Add on wieght for back of tonearm. 1/2" high chrome-look screws into many vintage Turntable, existing counter weights to help to balance arm. #9 condition.

$ 12

Dual 1219 index lever

# 56845

Index selector lever, with metal top and silver trim on handle. 2 available. Salvage part with light wear. Condition: 8

$ 12

Dual 1219 start/stop lever

# 56846

Lever for start/stop operation. Has metal top and silver trim on handle. Salvage part with light wear. Condition: 8

$ 12

Dual 1229 function levers

# 56847

Levers for index and start/stop. Black plastic top, aluminum trim on handle. 2 available. Salvage part, minor scuffs on trim. Condition: 8. Others available, show us a picture of yours so we can match it.

$ 12

Stanton STR8-20

# 57687

Silver body, black dial, 10mm shaft hole, Counterweight. #9

$ 12

BSR 510 and Sony HP-710

# 60353

Drop spindle. Excellent #9+ condition. *Several in stock*

$ 12

Philips GA-212 GA-312 hinge pin

# 45889

Two holes to mount screws, 1. 25" pin length. Two pieces available. Very good #8 condition.

$ 10

Generic lightweight head shell

# 47371

Extremely light weight, black color, aircraft type design.

$ 10

Garrard KLH 20 drop spindle

# 47454

(10 available) $10 each. Automatic record drop spindle for Garrard or KLH 20. Most common version spindle. Excellent #9 condition.

$ 10

Thorens TD-146

# 59176

(2) Speed cue knobs $10 each. 9/10 condition.

$ 10

Ortofon brass T weight

# 49262

For cartridge body. Excellent condition.

$ 10

DJ Pro felt turntable mat

# 49785

Made by Stanton. Mat only, no platter. Excellent #9 condition.

$ 10

Dual 1019

# 50717

Arm stand/ clip metal clip #8

$ 10

Dual 1019

# 50727

Arm stand clip, metal clip #8 salvage

$ 10

Dual 1214 arm stand

# 52321

Excellent condition.

$ 10

Bic 940, 960

# 53053

3 knobs for speed and functions, black, 1/2", condition #9

$ 10

Technics SL-B

# 60334

Series pinch control #SFDPB03M01. #9 Condition

$ 10

Dual 1237

# 54835

Cue lever (top) and black lever (under chassis) arm with tiny nuts, washers. #9 condition.

$ 10

Philips 212 start button

# 56875

Original silver button with black plastic ring at base. Salvage from low use machine. Condition: 9

$ 10

Fidelitone record cleaning brush

# 61125

Disc washer style with walnut handle and base velvet type pad, good condition, #9-

$ 10

KLH Model 20

# 62924

Brass Pulley for Garrard Turntable motor. Includes (2) set screws. Used, #9 good condition.

$ 8

Molex Power Connector

# 42105

4-pin molex power connector with 6" wires. Connector used in Garrard and many other similar auto change turntables.

$ 8

Dual Springs for Plynth

# 72322

Springs for turntable platform suspension. Many Variations, all similar looking with different spring tensions. Customer can send photo to us so we can find a match. All 4 springs need to be specific for the 4 corners. Some are color coded for spring tension. Spring can have 8 layers, 6 layers, etc. Counting from base to top of spring. Varying conditions, all are usable and mostly in excellent condition. #9 Condition. $8 Each

$ 8

BSR Idler

# 45836

Idler #28, 40mm total diameter, about 1" inner metal diameter, 7mm outer rubber diameter. Excellent condition, many available.

$ 8

Technics SL-J3 power cord

# 46919

Like new condition.

$ 8

Aluminum 45 RPM Record Adapter

# 70839

(5) available, priced individually. Machined aluminum. Heavy weight. Shows some wear. Condition #8

$ 8

Dual counter weight

# 61331

Thumb screw, #8 condition, slotted/knurled, shaft threaded ⅜" long, fits 1249, 1219, etc. , #9 condition

$ 8

Dual 1219 1209 friction stopper

# 47876

Friction stopper for elevator arm lift shaft, auto cycle, arm return function.

$ 8

Philips 212 Power On Button Plastic Housing

# 72301

Quantity(3), Priced per each, Black Color, 1 1/2" Long, 5/8" Wide, 3/4" Tall, 2 mounting shafts for screws on the long ends, [Housing only, for actual switch replacement see listing 48635] Condition #9

$ 8

Dual 1229, 1219, 1209, 1214, 1215

# 50227

Levers, frames, covers, springs, show picture of part required, most parts ($8) plus shipping - Out of stock of 1229 speed lever ***Send picture of top shaft and lever to help us find correct part as several variations exist ***

$ 8

Technics

# 50832

Or others. Machined aluminum 45 adapter. Allows play of 45 RPM records on standard spindle. May be used for other models. 1 1/2" diameter, 10/24" Hole to center hole= 1/4". 8/10 condition, has scratches and few small dings on outside perimeter. (1 available)

$ 8

Bic pitch control knob #13-221-01/1377433

# 51324

With pot, connecting wires, and pitch template. Red center line on end, 5/8"h x 7/16"diam. Used on 980/100 and possibly other models. Excellent condition.

$ 8

Bic 980 on/off micro switch V3-1123-D8-TV

# 51331

Excellent condition.

$ 8

Technics SL-B10

# 52246

Pitch lamp board w/ cover, lamp & wire connection, #SFDPBO3MOI, complete replacement kit, #9 condition

$ 8

Technics

# 52251

Slide switch for motor speed, EVAM34C10AAY, new

$ 8

Dual 1237

# 54836

Auto mute for audio, rides on cycle cam. #9

$ 8

DUAL 1237 Belt

# 54843

Original used and in #8 condition

$ 8

Dual 1249 and others

# 54891

Single play spindle, #9

$ 8

Dual CS 616 Q

# 55369

Counterweight dial; has original mounting screen; salvaged from working machine, 9/10 condition

$ 8

Dual 1209 Function Lever

# 55420

Black flipper; 8/10 condition

$ 8

Pioneer PL-230 On/Off Switch

# 55658

02X2RA, mounts near tone arm, has original wire harness intact, salvaged from low use machine. Condition: 9

$ 8