Audio Proz Service and Sales

eBay Facebook

Category:

Turntable Parts
( 849 Turntable Parts sorted by Price High to Low.)
Image 1 Image 2
Filter Results:
Image 1 Image 2
Filter Results:
Dual motor 221 062 214 837
# 47290
Similar to AM-400. Excellent condition, tested.
$ 38
Contact
Dual motor AM 400
# 47384
With harness and connector block. Made in Germany. Excellent condition, tested.
$ 38
Contact
BIC 940 960 Motor
# 71725
24 pole 300 rpm with pulley and wires. #9 condition (known no use time)
$ 38
Contact
Philips 212
# 57702
Smoked dust cover. Hinge pin holes are 12 1/2" space. Truly excellent, very minor scuffs at edge. Condition #9-
$ 38
Contact
Stanton Pickering
# 55911
TLE/2 P-Mount. 9 condition.
$ 38
Contact
Used Cartridges: We have many used cartridges which have all been exchanged here for upgrades. They are all tested and working perfectly. Some may need a new stylus.
Motor MMI 6P2RKB 12v
# 58204
12v 2 speed pulley, very common version, fits many models. Remove jumper for speed control. From low use, tested. #9+ condition.
$ 38
Contact
Ampex phono preamp 4010097-01
# 48142
Phono preamp with RIAA equalization. (This is a Mono Device) , Uses 8-pin socket connector. (1 only) Excellent #9 condition.
$ 38
Contact
Kenwood KD-48F
# 60223
Turntable main board with I. C. HTE8809. Salvaged from a working unit, tested. #9 condition.
$ 38
Contact
Dual 1015 motor 31 R-416
# 52330
4 speed, 60Hz. Excellent condition. No Pulley.
$ 38
Contact
FG-Servo
# 59892
MMX-3H2RPA Motor, DC12V. With Pulley. Fully tested, working, with board, connectors intact. Known low use, tested #9 condition.
$ 38
Contact
Sankyo DFSL07D 41102-A Motor
# 50560
Can go either CW or CCW depending on polarity of voltage, with brass pulley, tested and lubricated, salvaged #8 condition.
$ 38
Contact
Motor#MMI-6T2RWK
# 60266
9. 12 VDC with white pulley. This motor looks and fits the same as MMI-6T2RWKO. 9/10 Condition, no use salvaged. Missing hard copy
$ 36
Contact
Dual CS 1237 Turntable Base
# 56873
Black plastic and vinyl wood veneer base. Includes dust cover spring mechanism. This is the base only and does NOT include the wire harness plate. Has original mount for stylus brush/45 adapter/multi play stem. There are several light nicks in the veneer. Salvage from low use machine. Condition: 8+
$ 36
Contact
Pioneer BL 12-D
# 54403
Dust cover and hinges. Complete top and bottom. Smokey tint color. Typical light scuffing & wear on cover. #8+
$ 36
Contact
Thorens TD 166MK II
# 64438
Counter weight . Black with silver numbers and scale. Very good condition #9
$ 36
Contact
To inquire about a motor you can show us a picture and/or find model number on your motor.
Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
KLH 20 dust cover
# 45991
20"x13. 875"x4. 25" (slightly larger dust cover). Design with slide in hinges. Clear plastic slightly sun darkened. Very good #8 condition, top cover slightly warped.
$ 36
Contact
Pioneer PL-12D
# 54925
AC synchronous motor. Has wiring harness attached. 120/240V selector board included. Has original rubber gromet mounts on top plate. Low use, oiled, #9
$ 36
Contact
Matsushita motor MMI-6U2 RWO
# 57631
12VDC turntable motor, for Technics QT22D210. #9 used in excellent condition.
$ 36
Contact
Dual
# 49946
Motor, AM 400 with pulley, #9 condition, salvaged, tested
$ 36
Contact
Dual motor
# 49943
Motor #SM100-1; 3 3/8"x 1 7/8", 3 mounting stands. #9 condition
$ 36
Contact
Technics SFDP03M01 motor
# 47833
Turntable motor with board assembly and wire leads. Marked SFDP03M01 U-994V-1. 7/10 condition, needs repair, possibly its motor.
$ 36
Contact
Bic 940, 960
# 53121
Motor, #20-47 1001 same as #18-008-05, has 4 pin Molex connector, tested, condition #9
$ 36
Contact
Pioneer PL 12-D
# 54402
Pioneer PL 12-D Monor KXM-015-8 Has motor mount with rubber shock pads, complete wiring harness. Oiled, tested, good. 8+/10 condition.
$ 36
Contact
Philips 212
# 54956
Smoked style dustcover -uses pin style hinge -covers 11. 75 inches apart on center -8 condition some minor dings and scratches but could be buffed to near perfect
$ 36
Contact
LAST Formula 1 record cleaner
# 49783
Extra strength record cleaner with brush applicator. 2oz bottle with about 1. 5oz remaining.
$ 36
Contact
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $24-$26 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Dual
# 49948
Motor, AM 400 (missing label) with pulley, #9 condition, salvaged, tested
$ 36
Contact
Fisher MT-860
# 57665
Motor and Circuit Boards. Motor Sankyo VF02R18 with pitch control board. All wiring switches removed intact. Value is for motor and auto on/off switch. No use time salvage motor. #9+ Condition.
$ 34
Contact
OEM dustcover hinges
# 73062
1" metal "base" x 1 7/7" slotted clip holder. This hinge is used in MANY, MANY ! turntable types. Including Harman Kardon T-series units, JVC L-series & JVC QL series, Realistic LAB series, Sanyo Q-series, most Sony Turntables, many Yamaha units, and others ! (Priced for a pair)

Akai - AP-206, AP-207, AP-307, AP-A1, AP-B1, AP-B10, AP-B20, AP-B21, AP-D2, AP-D210, AP-Q41, AP-Q310 AR - AR the Turntable, EB-101, ES-1 BSR - Quanta 450SX Denon - DP-30L, DP-1200 Easter Egg - 123 Harmon Kardon - T35, T40, T45, T55, T60, T65, T70 Haybrook - TT2 Hitachi - HT-45, HT-460, HT-463 JVC - L-431, L-A10, L-A11, L-A21, L-A31, L-A55, L-F41, L-F66, QL-A5, QL-F61, QL-Y33 Kenwood - KD-40R, KD-50F, KD-55F, KD-600, KD-650, KD-990, KD-1600, KD-1600 Mk II, KD-5100, KD-8030, KP-1100 Kyocera - PL-601 Linn - Axis, Basik, LP12 Sondek Mitsubishi - DP-5 Panasonic - P200 Realistic - Lab-290, Lab-330, Lab-395, Lab-400, Lab-420, Lab-430, Lab-440 Sansui - FR-D3, FR-D35, FR-Q5, XR-Q9 Sanyo - Plus Q-40, Plus Q-50, Plus Q-60 Sherwood - PD-701B, ST-902 Siemens - RW777 Sony - PS-11, PS-22, PS-212, PS-242, PS-350, PS-LX2, PS-LX3, PS-LX4, PS-LX5, PS-T1, PS-T2, PS-T3, PS-T-15, PS-T22, PS-T33, PS-X22, PS-X30A, PS-X33, PS-X40,
PS-X45, PS-X50, PS-X55, PS-X55S, PS-X60, PS-X70, PS-X500, PS-X600 Taya - CP-260 Teac - TS-F50 Technics - SL-1400 Tensai - TD-855D, TD-8550, TD-861B Toshiba - SR-A100, SR-A200, SR-F200, SR-F335, SR-F440, SR-F450, SR-F451 Yamaha - P-200, P-220, P-300, P-320, P-350, P-450, P-500, P-520, P-550, P-700, P-750, P-751, P-850, PF-20, PF-30, PF-50, PF-80, PF-800, YD-850, YP-D71





$ 34
Contact
Motor MMI-6S2RWH
# 57234
DC 12 volt motor board, with switch, trimmers, white pulley with rubber shock, screw. Like new, #9+ condition. This motor works for many brands and models.
Note: This motor is not MMI-6S2RJ
$ 34
Contact
Thorens audiophile mat
# 43892
With only center spindle hole. Like new.
$ 34
Contact
Thorens TD 146 Platter Mat
# 59173
11 3/4" in diameter. 1 5/8" inner diameter hole. 9/10 condition, low use LIKE NEW.
$ 34
Contact
Garrand C4 Carrier
# 60397
(pair- Can make one from two) Carrier pins need T. L. C. Needs wires. Carriers nice, Condition #8
$ 34
Contact
Sony motor 1-608-883-11 GCMK-45EX
# 52245
Direct drive motor with main control board. Excellent condition.
$ 34
Contact
Sankyo Motor #VF02R18
# 57271
With brass pulley; low use, tested, in excellent #9 condition. Also available, power supply: $18.
$ 34
Contact
Dual 1214 motor, # 221 062
# 52684
(no pulley), tested, low use time, same as AM 400 , also used in other Dual turntables. Condition #9+ (3 available)
$ 34
Contact
Sold items are kept on our website as a record of the kinds turntables we have sold or serviced.
Please feel free to inquire if interested in any of these items.
Empire 990 Counterweight
# 58354
Dull brassy, gold look. 8+/10 condition (very minor scuff).
$ 34
Contact
Thorens TD-166 MkII counterweight
# 46770
Very good #8 condition, with minor light scuff on surface. Will also fit in some cases the Pioneer PLX-500 with proper add on weight. This is the lighter weight version counter weight.
$ 34
Contact
Pioneer PL-112D and others
# 54940
Original head shell. Black matte finish, brushed aluminum tab, wiring harness intact. For use on Pioneer S shaped tonearms #9 condition
$ 34
Contact
JVC L-A11
# 57661
Motor with grommets. Large version motor design with Hardware. Equivalent/similar too: INV. # 55850. This is common ac syncromis motor which fits many belt drive Japanese TT. Existing custom motor pulley will have to be changed to make for correct speed which can be removed by loosening base screw. #9 Condition tested, low use & lubed.
$ 34
Contact
Dual 1015
# 52577
Square version turntable case, high quality wood, minor scuff on cover and rare, very nice condition #8
$ 34
Contact
Dual 1214
# 52379
Motor with pulley, #227333, for 1214 and other models, condition #9
$ 34
Contact
Dual CS 506 Turntable Base
# 56871
Black plastic and vinyl wood veneer base. Includes dust cover spring mechanism. This is the base only and does NOT include the wire harness plate. There are some light nicks and slight peeling of veneer on one side. Salvage from low use machine. Condition: 8
$ 32
Contact
Turntable motor FP20/4S WL
# 49922
3. 25"x2. 5" outer shell dimensions, with three mounting posts. Includes pulley and color coded leads wired to connector. Very good #8+ condition.
$ 32
Contact
Direct Drive Motor
# 52244
For various models, #DDM-6F, with 10 pin ribbon connector with spindle and magnet, new, #9 condition
$ 32
Contact
Thorens mat
# 43871
Heavy mat with eight radiating slots from center for dampening record. This is an audiophile quality mat!
$ 32
Contact
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Dual 1214 Dust Cover
# 62674
Dust cover, with "Dual" logo on center. 14"W x 11. 75"D x 2. 75"H. Small crack about 1 inch in right rear corner. #8 condition.
$ 32
Contact
Preamp USB Board DL422U/UXL PC08P023
# 71389
Ion turntable preamp USB board. Board salvaged from unit with all cables and wires. Condition 9.
$ 32
Contact
Technics SL-3
# 61037
Main board cracked, IC's: Technics (28 pin IC) *IC 301 onboard, AN 6554 (14 pin IC ($14)) IC 401, value is for IC, known working before board was cracked, #7
$ 32
Contact
Bic 940, 960
# 53057
Motor, 24 pole 300 RPM, for Bic 940, 960 - same as 18-008-05, tested ok, condition #9
$ 32
Contact
AR-XA Turntable Dust Cover
# 73884
For original AR XA Turntable. Plastic, "light smoke" color. Minor buffing haze, (could be polished out) No Cracks or dents. Condition: 8
$ 32
Contact
Pioneer PL-112D motor
# 54938
For PXM-033-0, 60hz, 120/240v (no rubber grommets) with 3 mounting screws -reshaped brass pulley for correct speed -9 condition with low use and tested/oiled
$ 32
Contact
Ion Preamp Board with USB Circuit PC05P002A
# 71388
Ion USB Board. PC05P002A. Preamp board with USB circuitry mounted on frame. Condition 9.
$ 32
Contact
Micro Seiki DD-20
# 59349
Hinges for dust cover. But kit only includes one reinforcement plate designed for dust cover. Another plate can be fabricated by customer out of plastic easily. Similar to many technic design. Nice condition, excellent working condition #8
$ 32
Contact
Thorens TD-110/115 Counterweight
# 71426
W/ mounting rod. Length 14/16" Dia 1. 25" Scale calibrated in 0. 5 gram intervals. Like new/excellent condition. Condition 9+.
$ 32
Contact
Thorens TD 166 MK II
# 70778
Speed selector mechanism for 33/45 . Includes steel rod and cage to guide lever as well as the screw . Also has the start stop switch. No tear drop handle included (check our other listings) Good condition #9 pulled from a damaged unit
$ 32
Contact
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Technics SL-B210
# 55567
Motor, (1) available MMN-6P2RE also (1) available replacement MMN-6C2RK, can be substituted Customer must provide pulley, and or sensor. Check proper (clockwise) motion when installing, low use from salvage, tested/oiled. (1 available of each number in this listing). Motor Only. $32 each.
$ 32
Contact
MMN 652PR
# 64227
DC 4 Volt Motor, Salvage, Condition #9
$ 32
Contact
Garrard Model 70 Counter Weight
# 73314
Gold color, 1 1/4" diameter, 3/8" threaded center hole. Has rubber suspension. #9 condition.
$ 30
Contact
Sony OS-LX150H
# 53494
Motor. Matsushita. MMI-6S2RWh DC12V - with removable brass pulley. #9 condition. Unused but salvage.
$ 30
Contact
Thorens 160 Rubber Platter Mat
# 43187
Original Thorens, like new quality. 9/10.
$ 30
Contact
Mitsubishi LT-90
# 53584
Motor sankyo BFD2RI8. With pulley and board. #9 Condition. Salvage. Low use.
$ 30
Contact
Lenco
# 53158
Drive idler. 2 1/2" wheel and arm with spring. For lenco and other under platter drive. Rejuve rubber. #9
$ 30
Contact
Dual 1015 Motor Switch
# 52662
Old early version, (with AC auto on/off switch box), wires in with lever, low use time, tested. Condition: 8+
$ 30
Contact
Vector Research Dust Cover
# 46176
Dust cover only, no hinges. 16" wide by 12. 5" deep by 2" high. Excellent #9 condition, almost new.
$ 30
Contact
Thorens TD 146 Counterweight
# 59177
Black with silver numbers. 9/10 condition.
$ 30
Contact
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 or email us at sales@audioproz.com to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
Dual AM400 motor
# 47236
With USA three speed pulley. Excellent condition, tested.

If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
$ 30
Contact
Technics SL-BD27
# 53287
Motor. Matsushita. MMU-5P2RWZ 12 VDC With removable plastic pulley and rubber mounting holster. #9 condition. Tested, oiled. (M. I. A)
$ 30
Contact
Empire headshell for Sony PS-FL3
# 56668
Silver with wires. Condition: 9
$ 30
Contact
Kenwood KD-48F
# 60226
Lipmat and platter together. Similar 33/45 speed switching mechanism to technics turntable. From working unit, tested #9 condition.
$ 30
Contact
Technics Head Shell
# 53519
For all consumer and pro T. T. With lead. #9 condition.
$ 28
Contact
Thorens 166 165 147 mat
# 43893
Like new.
$ 28
Contact
Dual 1209 Counterweight
# 54306
Dual 1209 Counterweight. 9/10 condition.
$ 28
Contact
Micro Seiki DD-20
# 59421
Counterweight. Excellent, clean, condition #8
$ 28
Contact
AIWA LX-100
# 56113
Loading tray motor. MDN-7R4. 12-volume. 20 September 82 BA. Has original mounting bracket. Wiring harness intact. Has original brass pulley. Low use, oiled/tested. 9/10 condition.
$ 28
Contact
Micro Seiki DD-20
# 59650
Metal platter. Chrome edge has obvious minor corrosion around rim. Nice clean condition #8-
$ 28
Contact
Spare or substitute parts may be available. Email Us at sales@audioproz.com and include a picture and/or the number on the unit. We make excellent spare part selections.
DUAL 1237 Counterweight with Stem
# 54834
Black with Silver Trim. Condition: #9
$ 28
Contact
Dual 1229 speed select lever
# 56848
Dual, 1229. Speed select ever, Long shaft lever with notch for pitch adjust wheel, Has aluminum trim, Plastic top, Salvaged from working machine, condition is 8+. Shows wear on the trim. The item is not currently in stock as this is the rarest of levers.
$ 28
Contact
KLH model 11 and others
# 55134
Motor with original mounting rubber grommets and pins. Has original 16/33/45/78 brass pulley. Has complete original wiring harness, including switch and connector. Oiled and tested, minor rust spots, #8
$ 28
Contact
Micro Seiki MB-10 Platter
# 73073
Metal platter. Very slight haze of oxidation. Easy to clean up. Condition #8
$ 28
Contact
Pioneer Turntable Mat
# 58685
PEB-008 D-11. Can be used in SLI1200 series. Very clean, a few visible scuffs- fits. 8+/10 condition.
$ 28
Contact
Dual CS 616 Q, CS 1268 and others
# 55413
Counterweight. Brushed aluminum finish with dark grey insets. Salvaged, like new, 9 condition.
$ 28
Contact
FP 20/4s WL
# 49931
Motor, color coded leads wired to connector, 3 1/4" x 2 1/2" outer shell dimension with pulley, 3 mounting posts #8+ condition
$ 28
Contact
KLH Model 20 Gerrard
# 61511
#40-60, 100-130V 0-14A, 10W motor, good condition, #8
$ 28
Contact
Dual 1229 speed/pitch mechanism
# 61995
Complete, all parts in tact, springs, etc. .. Entire assembly was removed in tact from unit, condition # 8+ (NOTE: I have encountered 3 variations of this item We need a picture of what your original leaver looked like from the top side view siting position, maybe find a internet photo if necessary that matches yours exactly, so we can provide the correct version. )
$ 28
Contact
AIWA LX-100
# 56112
Tone arm motor and assembly. For linear tracking LX-100. Assembly includes wire, gears, pulleys. Motor # MDN-7R4. 12-volume. Needs belt. Wiring harness intact. Salvaged from working unit. Oiled/tested. 9/10 condition.
$ 28
Contact
Check us out on facebook.
We keep our database up to date with almost 10,000 items in stock.
If you see a part number and a price, we have that item in stock.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g).
We are glad to combine orders to reduce shipping costs.
Take a look at our shipping policies for more information and estimates of prices and shipping time.
Dual CS-616Q Dustcover
# 54086
Amber colored dustcover. Light scratches with buffing. 8- condition.
$ 28
Contact
BIC 960 chassis
# 48416
Chassis only, no dust cover or base. Can be serviced or sold for parts.
$ 28
Contact
Dual 1009 for service or parts
# 48420
#8+ condition base and dust cover available, $22 each. Head shell, $28. Excellent cosmetic machine in need of service.
$ 28
Contact
Dual Platter
# 54383
For models 1209, 1214, 1215 and others. Rubber good. Small dent on inner aluminum ring, #8+
$ 28
Contact
Dual Platter
# 54382
For models 1209, 1214, 1215 and others. Rubber good, aluminum inner ring. Has small dull spots, #8+
$ 28
Contact