32.2" round, c/s:070 #10 New
Possible Elac or miracord,. Nickle finish with 12 black lines, 1 1/4 inch diameter. 1 inch long. #8 condition.
Black weight at bottom of aluminum counter weight. Imbedded in aluminium shaft offset hole DIA 8mm for arm. Overall size: L= 22mm, Dia= 33mm. Black Wt Dia = 2/mm. #8 condition, used. Has some scuffs and nicks but very usable.
We have many parts available, including platter, counterweight, mat, and motor, all in excellent #9 condition.
Contact us about similar items or replacement parts.
Complete assembly with solenoid and cycle cam.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
A functioning unit, complete service. Missing headshell, has broken start button. #7 condition due to broken start button.
Bottom spring load assembly with four screw holes, Two pieces currently in stock (1 piece with paint scuff on edge). (1 missing spring cover plate) #8 price is each.
for various models, #DDM-6F, with 10 pin ribbon connector with spindle and magnet, new, #9 condition
with board MDC960 and includes IC VC1031. Excellent #9 condition, tested.
made by Stanton. Mat only, no platter. Excellent #9 condition.
With motor board and wires. Excellent condition, tested.
Contact us about similar items or replacement parts.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Will also work with all Garrard turntables. Condition: 8
auto start levers, various models, #9 condition. Send us a photo of your lever so that we can find the exact match.
Power cord. 4 pin plug, 1" wide connector, 6' long. Two AC wires and white ground wire. #8+
Platter for models 1209, 1214, 1215 and others. Rubber good, aluminum inner ring. Has small dull spots, #8+
Platter for models 1209, 1214, 1215 and others. Rubber good. Small dent on inner aluminum ring, #8+
Power cord. 4 pin plug(1" wide), 6' long, with two AC wires and white ground wire. #8+
To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
Pulley for turntable motor 60hz, fits 4mm axel, 3 speed. #9 condition
Contact us about similar items or replacement parts.
Turntable base(fits many models). 16 1/2 x 14 3/16 3. Has walnut vinyl trim 2 3/16" wrapped around top. Has built in spring hinges with gear roller adjustments. Small Dual logo in left front corner. Note: AudioPro sticker stuck on bottom and will need to be removed as it has hardened. #9
Power cord. 4 pin plug, 1" wide connector, 6' long. Two AC wires and white ground wire. #8+
Arm holder and clip, model unknown 1 5/8"HT x 5/8"W x 4/8"Depth (mounting Screw 1/2") with clear plastic clip
Acrylic prism Glass model unknown, for viewing strobescope 5/8"HT x 5/8" W x 14/16"Deep Has circular raised (mounting base 5/8"Diameter X 3/16" HT) #9 Condition- No Scratches looks New!
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
Motor, AM 400 with pulley, #9 condition, salvaged, tested