Type 5716. Motor, 9/10 condition: $40. Platter, 8/10 condition: $20. Belt, 8/10 condition: $15. 8+/10 condition overall.
1 - Motor MHN-3P2RDB $68, 1 - Motor speed board 49 2267030 $24 (with all parts wires intact has I.C. 1003C2 for speed control), Tested and oiled, known low modest use items. #8+ condition
We have various automatic record drop spindles available here. Please show us a picture of the spindle you need. We have BSR, Bic, Garrard, Elac, KLH, Dual, etc. $10 to $20 each. *This part has become scarce in working condition; most spindles are missing little rubber record hole grippers. I have plenty of spindles but somehow small little rubber squares must be glued into "umbrella" stem to allow drop functions. Info online does not exist about this fix done by hobbyist but if doing it here, spindles would cost $48 due to fussy labor required to fix, test etc.
Used in ATP-2, replaces ATP-N2. 78rpm. New stock.
Cable harness. Gold plated. Fits into bottom of arm assembly. #8+ condition.
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business. We strive to offer good products at competitive prices. While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run. We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Battery powered electronic cleaner. Used in good condition #8
Arm with counter weight pivot + rest, missing roller brush, #8 condition
Body only, this can fit 78 rpm stylus, see also our inventory #45449
USB stereo turntable. USB board 405-AT2DUA-2022A. Easy to install wire leads. 9/10 condition, taken from units with very low use time.
(3) dust cover hinges, $14 per pair. 9/10 condition.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
With wires. Very good #8 condition.
Contact us about similar items or replacement parts.
300 rpm, 115 volts, 60 Hz, 1.5 watts. With color code leads attached. Excellent #9 condition.
A note on AR turntables:
We have had many customers write in asking about original version XA AR turntables. We rarely have any complete ARs, because we usually break them for parts - they are worth more in pieces than as complete units. Be aware this design has a number of faults that prevents these from being true audiophile turntables. The original arm cannot track a good quality cartridge (too much friction) and the arm is also too heavy, so that only a basic 2.5 to 3 gram tracking force low compliance design stylus can be effectively used. A modified AR with a new arm, dampened chassis and other mods can be nicer than some more expensive units, but there are plenty of better vintage Japanese turntables that can be had for around $200, that will simply work better with modern quality cartridges. I mainly deal with well-done technology that stays calibrated and is reliable and easy to fix, and most of my customers want a turntable that has auto-return, pitch controls, hinged dust covers, etc. AR were amazing for their brilliant suspension design, but the archaic arm design and motor rumble noise holds these units back unless they've been modified. I am happy to continue to supply parts for these turntables, and if requested I can explain how to modify the arm and suspension to be usable with a better cartridge.
Later version AR ES-1 turntables are superior turntables and the arm is excellent and not to be changed out! Only a correct cartridge type should be installed.
- Vince
Contact us about similar items or replacement parts.
Nickel Version. Salvaged from working unit. 9/10 condition.
Contact us about similar items or replacement parts.
Pulleys for AR turntable motor. Very good #8 condition.
Contact us about similar items or replacement parts.
For Turntable motor speed regulator. Tested OK. Salvaged, low use #9 condition.
Phono preamp with RIAA equalization. (This is a Mono Device) , Uses 8-pin socket connector. (1 only) Excellent #9 condition.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Carbon fiber/velvet. New, several available.
(5) available, priced individually. Machined aluminum. Heavy weight. Shows some wear. Condition #8
P1021B501A, 2A, 3A, 4A, 5A. Salvage from low use machine. #9
P1021B501A,2A,3A,4A,5A. Excellent #9 condition.
Tone arm motor and assembly. For linear tracking LX-100. Assembly includes wire, gears, pulleys. Motor # MDN-7R4. 12-volume. Needs belt. Wiring harness intact. Salvaged from working unit. Oiled/tested. 9/10 condition.
Loading tray motor. MDN-7R4. 12-volume. 20 September 82 BA. Has original mounting bracket. Wiring harness intact. Has original brass pulley. Low use, oiled/tested. 9/10 condition.
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
Automatic electronic control, motor - spins (CALL), good for dust cover (CALL), *arm stiff - horizontal plane (arm motor has corrosion), arm intact with counterweight fixed head shell (CALL), platter (CALL), matte (CALL), ADC LMA-1 Cartridge proprietary for use with optical sensor stylus/suspension good (CALL), condition #8 (call for pricing info 617-926-8020 12 noon -6pm)
For Audio Technica AT-LD2D. 9/10 condition, pulled from brand new turntable. Substitute MMI-6T2RWKO motor
Contact us about similar items or replacement parts.