(1) only cabinet with dark brown walnut and no drivers, condition #8 minor 1/4 inch chips on 2 cabinet corners, still very good for use (contact us for pricing). grill black, condition #8+ with badge ($22)
Can replace ADS, Rectangular plate tweeter 2060100. Black textile dome, (2nd filter added, perfect for 3-way designs, remove filter if required for 2-way design) . Used #9 condition but tests perfectly.
From model 250, (2) available, black poly dome, test perfect, from low use speakers, #9 condition (price is for each)
Contact us about similar items or replacement parts.
2 Available ($33/ea). Part # 5DR51481. Tonegen Built Part # L52TNG. 8" woofer 8 Ohm. Paper cone, textile cloth surrounds, 2 3/4" magnet, Swept tested. Slight dimple in dust cap. Low use pulled from working speaker cab. Glue on top gasket from manufacturer. Condition #8+.
Contact us about similar items or replacement parts.
3/4" paper dome, front tinsel leads. 4 3/4 round faceplate, 3 hole pattern (3 5/8" C to C) fits early AR 3A. Early version tweeter hand made look, flange warped from being screwed in cabinet. Used, pulled from working unit. #7
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
(1) 7" woofer 4ohms. Black stamp basket, butyl surround and black cone. Sweep tested okay, #8+ condition.
Tweeters 2 available ($38.00 each), part #206-0122, swept tested, used - good condition, pulled from working spkr, condition #9
Contact us about similar items or replacement parts.
(pair) $58 each. Masonite frame w/ black case to protect tweeter, orange fried egg tweeter. 4ohm, swept tested good 1.5khz-10khz. #9 good condition, pulled from working unit.
Tweeter Array #11776 #11777, add on to vintage speakers. Very nice walnut case (9 1/8"L x 4"HT x 5"D). Barrier strip screw terminals, high freq level control, switch for 3.5 KHZ or 7.0KHZ. Good condition, all drivers functional, used #9 condition
(1) Advent Speaker Grill, Large. Pressboard frame, good, (24" x 12.5"). Light brown cloth with Advent logo. Small hole in center of woofer cut out. water stained lower left side. #7 condition.
(eminence) Parts express #290-530. #10 condition (new)
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
(2) available, priced individually. 1 1/8" textile dome, large round face plate. 6 ohm Sub for AR-3/3A tweeters, best fit to existing hole. New. Condition 10
(1 pair) available, good condition, Particle board frame. (19.5 "l x 10.5 "W x 3/4") 45 degree bevel, edges on front. Black cloth - each grill has 2 small pulls. No Logos, velcro attachment. #8+ good condition.
(2) 2.5" Cone tweeter with plastic grills, mounting plate and hardware. Swift tested good. 2 available (1 pair). Used in some early infinity speakers (2000 series). Good, pulled from working unit. #9
(Pair) very sturdy design, up/down locking mech & left right swivel. Makes 3" clearance from wall. (requires hardware appropriate to cab and wall. 8+ condition).
(1) 4.5" midrange driver with textile surround. 8 ohm, all black. Swept tested ok. Used in Pioneer CS-99. #8+ condition
Titanium Dome tweeter (pair available) aligned element for best performance, sweep tested all OK. Used, Very good condition. #9 priced each
Contact us about similar items or replacement parts.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
Custom (BA) Mounting plate , with dispearson lens + heatsink on rear and foam gasket. Hole pattern 2' C/C L-R (horizontal), 2.75 " C/C Up-Down (vertical). Swept tested 1.5 KHz-10KHz. Low use, #9+ excellent condition.
(1) 8" Woofer, 4 ohms. Professionally refoamed, swept tested good 25-500hz. Classic New England 8" paper cone woofer, black cone grey surround. Fits many EPI Genesis models. Works well with passive radiator models ie (Genesis 2, 2+, 210) Used - good condition #8 condition
1 Pair. Black metal trapezoid frame design. 22" Height. 7.5" x 7.5" mounting platform. Tapped for spikes top and bottom. 1 bottom tap has rubber pad in place. Used with visible wear. Condition 8+.
Contact us about similar items or replacement parts.
(1) 10" Woofer, thick pulp cone replacement foam with splice seam. Large square magnet, 4 ohm, dacron in place voice coil alignment. Grey, dark purple look. #8- condition
(1) 10" woofer, thick pulp cone, treated textile surround (RTV). Large square magnet, 4 ohm impedance, Blackish cone, and dacron in place for voice coil alignment. #8+ condition
(2) 4.5" midrange, sealed back #760928. Black treated cone, Green surround. No mounting holes, sweep tested. (ok). Used in KLH 58 + others. #8 condition. ($12 each).
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Single Speaker Grill, Lauan plywood type frame. Measures: 21.5"L x 12"W. Weave on cloth, Gold black specks, no holes or tears. With Criterion oval logo badge brown with gold raised lettering. Used, #8+ good condition.
(pair) Speaker Grills. 21.5 "L x 10.5"W Masonite frames, slightly warped. 3 cut-outs on frame, Woofers - 8 3/4" diameter, Midrange - 4.5" diameter, Tweeter 3.75" diameter. Logo attached: Wharfedale achromatic system, black with gold, raised lettering 1.75"W x .75"Ht. Cloth in good condition, but loose on frame, gold, brown flecked cloth. Used, #9 good condition.