Call for parts, Break apart Rosenut cabinet #8 condition. Original woofer sweep tested ok, #9 condition. Treated butyl with mink oil. Original Tweet (N.G diaphragm cone , Plate & mag only ) X-over intact , black grill #9 condition.
8" Woofers #P13-0003. Butyl surrounds, swept tested, excellent condition with one cone faded. Good for 2-way or 3-way cabinets. Also woofers has heavy cone designed for bottomed end. "deeply turned". #9 (2 available)
Metal speaker cups, 1 1/2" (38mm). Internally mounted metar speaker cups 1 1/2", speaker stands. 150 LB capacity, black, 4 2/16 flange diameter. #10 (2 available)
Alnico magnet, stamped frames, treated cloth surround ("W type") Dust cap vented with cloth screen appears have silver over spray. Ribbed paper cone, guitar lead fat sound. Very good condition #9 (2 available) 1 @ 8 ohms, 1 @ 16 ohms Priced each
8 ohm 300-20khz 8" x 3.5" plate design black , New units, (2 available) priced each.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Planar Magnetic Transducer Black 4" x 8" plate design. No paint pealing. Condition is a #9
8 inch special deep bass version woofer. Fits AR and many models, wool paper cones. #8 condition. (2 available, priced each)
6" woofers on Pin cushion frame. Part #55-0092 2 available - Dual voice coils 8 ohm with butyl surrounds on a poly cone. Pulled from cosmetic damaged in wall speakers. Swept tested #9 condition
6.5" round woofers Part#55-0048 2 available. Pulled from cosmetic damaged unit. Swept tested good. Dual 8 ohm voice coils. Clear poly type cone. # 9 condition
Driver only, 10" woofer, part# 17012-0000, Large 1" roll foam surround, Paper cone with 4" inverted dust cap, 8 ohm, 5.25" large magnet, Good condition, Few minor dirt stains on cone, Pulled from defective destroyed cabinet, Condition 8+
2 available, priced each, 3/4" Polycell tweeter, Faceplate 3-5/8" diameter (3 holes 2-7/8" center to center), Black with gold lettering + Infinity logo, Part #902-6318 75509 Tonegen 152TND, Excellent condition, Pulled from Infinity RS425, Can be used in other models, Condition #9+
Contact us about similar items or replacement parts.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
4 available, priced each, Textile surrounds, paper cone, 4 ohm, New stock, Condition #10
12" Dual VC Woofer, 8 ohms, Professionally refoamed, Swept tested, substitute similar to Ohm or Infinity Quantum 5, Condition #9
8" Guitar mid/woofer, 2 available - priced EACH, 3.5" magnet, Part #299-052, MDL #NR806FG-1, 6.5 ohm, Lightweight paper cone w/ textile ribbed surround, condition #10
Butyl rubber surround, Flat dust caps, lightweight paper cones, Part #1919, Vintage, Deep bass, 2 available (priced each), Condition #8
Pair, Coaxial, 4 ohm, Frequency range 62Hz-32kHz, 40 watt max, Separate tweeter (3"), Aluminum dome, Midrange 3.5", One terminal bracket needs repair, but works, Sweep tested Good, Condition #9
2 available, priced each, 15" PA woofer, 8 ohm, 3" voice coil, Large magnet, 500 Watt, Accordion surround, Sweep tested OK, Condition NEW
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Two (2) 8" Woofers, priced each, Butyl surrounds treated with mink oil, Sweep tested OK, Dacron in place for best realignment, Condition 8+
Contact us about similar items or replacement parts.
1" soft dome tweeter, priced each, Square plate, 3.75" Black, Sweep tested OK, Very minor crease on textile, does not affect fidelity, 1 unit available Condition #8
10-inch woofer, 4 ohm version, Very clean cone (minimal glue - condition #8), Cone is very tightly vacuum compressed version (All are quite similar but this info can help to nicely match with other woofer), Canvas surround recoated, overall condition #8+
10 inch woofer, 4 ohm version, Refurbished cavas surround, Unit has some typical corrosion at magnet & frame, Tested good, Condition #7
(2) available, Frames intact, Minor warps, Grills have stains but are functionally intact. Could be spray painted beige to match another beige grill nicely. (slight different) weave Condition #6 (1) additional frame available but has bad torn cloth, will need new fabric. Priced each grill
Pair, 1.75" cone tweeters, Black face (painted) with mesh grills, Large 3" square magnets, Excellent condition, pulled from working units, Sweep tested good! Condition #9
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business. We strive to offer good products at competitive prices. While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run. We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Two (2) available, FPS 0212M7R1 (Parts Express #292-364), Thin flat panel design (6.25' H x 1-9/16 W x 5/16 Deep), 6 ohm, Rated to 15W, 180Hz-20kHz, Possible use/replacement in Infinity speakers to replace Emit Tweeters, New, Condition #10
2" cone mid/tweeter, Matsushita EAS-65PH315, w/ OHM logo mounting plates (4.25" diameter) + screen over cones, 8 ohm, Good condition, Sweep tested OK, 1 available, Condition #9 priced each