For MX5050 MKIII -8, possibly others. With 32' cable. 2A-54C with original box. 9+ Mint condition.
Contact us about similar items or replacement parts.
8 track reel to reel and 8 channel mixer, 3 band eq, 1 fx send, each mixer channel switchable to mic/line/rmx. This unit is not currently for sale, (vinc personal unit) PS update, calibrated, 250 NW standard, Heads 75% good, but we do service, sell and have parts for these machines.
new in box with packaging
Contact us about similar items or replacement parts.
Remote Control, hand held remote with 15ft cable, 9 pin din connector, 1 small dent on face, nice lettering. This unit also has slide/step pause function.
Contact us about similar items or replacement parts.
Good front panel cosmetics, runs at 1 7/8, 3 3/4, or 7 1/2 ips. Sound on sound capability. Two 1/4" mic inputs on front. Stereo analog meters on front. Input for optional remote on rear. RCA in/out on side panel. Minor scratches on top and sides, left rell arm bent. Unit is being sold as is for parts or to hobbyist.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Excellent front panel cosmetics. Minor side panel wear. Analog dual stereo meters on front. 1/4" inputs on front. Can run 7" and 10 1/2" tape reels. RCA in/out on back panel. Completely intact machine, but it has a cracked preamp board. Call for details.
Rack mount, Heads are 95% good, Calibrated to Ampex 456, Maxell UDXL (in LH position), unit was serviced, corrected head adjustments, adjusted brakes, #9 condition, slight staining on front
Contact us about similar items or replacement parts.
MISSING INVOICE Complete and original in Tascam vinyl binder! Includes all calibration procedures and schematics.
Contact us about similar items or replacement parts.
Excellent front panel cosmetics, minor dings on side wood panels. 7 1/2 and 3 3/4 ips speeds available. Low noise and wide range recording options. 2 1/4" mic inputs on front, RCA ins and outs on back (stereo). Connections for optional remote on back. High current draw on start up.
This is a unit for parts or repair only. It would be fixable in the hands of a good tech but we simply did not want to invest our time in it. Best to call for a more detailed description.
New item with original case and installation instructions. Includes complete head block (erase, record, play). For model PP-204T. 1/4" Track Stereo
Contact us about similar items or replacement parts.
#10 condition, new stock!
Contact us about similar items or replacement parts.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
Contact us about similar items or replacement parts.
5800297500. NEW STOCK.
Contact us about similar items or replacement parts.
1/4" reel hub adaptors, pair for $68 ($34 ea.)
Contact us about similar items or replacement parts.
E2B Series, Fostex # 8260203201 Pinch Roller for 1/4 inch tape. New XA910BX
Contact us about similar items or replacement parts.
remote control, 12 pin rectangular connector, tested perfect, condition 8, cord very soiled, cracked grommet at the cable end, still intact
Contact us about similar items or replacement parts.
4 Track, 2 channel Stereo Deck. Left/Right Line/Mic Level controls. 1/4 inch mic input on face, 1/4 inch headphone out. Tape/Source monitor, wide range low noise tape selector. 3 3/4, 7 1/2 inch tape speed. Rec mute on/off. Output level control, digital counter/minute feature. Silverface unit. Fully serviced, minor staining on face. Excellent calibration (Ampex 456/Maxell UD35). Has hub adapters and original manual. 8+ condition.
Contact us about similar items or replacement parts.
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Excellent condition, has 16ft cable w/ 11 pin connector end.
Contact us about similar items or replacement parts.
Reel Deck.
Contact us about similar items or replacement parts.
2 Track 1/4" Semi-Pro/Pro Tape Deck. 7 1/2 ips/15 ips. Mint condition heads, slight corrosion on capstan, all control switches cleaned and calibrated. 0db at meters and output control, -10db at output for semi-pro level. Back panel has high/low output at high position.
FYI: A common problem is that the grease on these machines becomes dry wiht time and freezes the pinch arm and tape lifter mechanism. Unfortunately, this requires a major take apart and removal of the auto-stop switches, capstan plate, etc. to oil the pivots. The pinch arm will feel practically welded to the axel and special cutting oils and heat are required to soften the grease and allow assembly to come apart. When they get like this they should really be worked on by an experienced tech.
Contact us about similar items or replacement parts.
1960's era, 4 inch reel to reel, with leather case, very good condition. With origional mic, untested proablly can work with service.
Contact us about similar items or replacement parts.
Dual flutter roller design. Key button operation. Compact 7 inch reel. 3 3/4 and 7 ips. EE setting is Maxell Ampex 456 Standard. Headphone, mic inputs. Heads 90% good. Level control at #7 is 0db. New belts, calibrated. 9/10 condition.
Contact us about similar items or replacement parts.
Open Reel Tape Deck (1/4 track stereo) 2 speed, 7 1/2, 3 3/4 IPS. 7" Reels, Rec EQ + Bias (high or normal), hiqh EQ/bias set for Maxell. 1/4 mic/inputs w/ level control. Tape/source monitor switch, electronic transport. 80% head life left , good shape, unit calibration very good. Has few scuffs on front panel. #8+ condition
Contact us about similar items or replacement parts.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
7 inch - 3.75 ips - 2 minor rust spots on face 8.5 condition - 2 minor woodside dings - heads 80% good - Punch #9 - Complete clean and serviced - Maxell UD 7.5 EQ and Bias 1/ 3.75 EQ Bias 2 - late version quiet cue arm - 9/10 Mechanical.
All our machines have been serviced in our shop to be guaranteed functioning and reliable well into the future. They are sold with service logs explaining the work performed on each individual unit. It is important to hold onto these service logs as they will provide valuable information to any tech servicing the machine in the future.
Contact us about similar items or replacement parts.
10" Reel Recorder, Auto Reverse. with NAB hub adaptors. Black face version. Complete professionally cleaned calibrated. Heads & Mechanics excellent, recent new belts, like new Pinch. (RC-100 wired remote is available additional $130 Listing # 54640) 8+ condition