Part #JC-00107. CW direction Very good #8 condition.
For editing and splicing 1/4 inch tape. Magnesium body with plastic jewel case. Excellent condition. #9
Wire SPOOL by Webster-Chicago. Hour Spool CAT NO W-175
Yellow background with green scale, approximately 4"x2"x.5". Excellent condition.
115v, 50/60Hz, 1 amp, 1400rpm, clockwise. With mount bracket and reel table hub. Used in very good condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
with brass pulley and board #TK-T134 94v-0. Excellent condition.
Contact us about similar items or replacement parts.
Headcover #9 condition $48, Capstan Belt #9 $12, Function relay board 50484130 $48, Reel motor control board 51670531 $48, Bias OSC Board 51670540 $38, Function button assy (rec, play ect) $24, REC, Meter board $28, Line amp board 5170511 $38, Wood side panels (left or right) #8 or better condition $22 each.
Pitch control switch on PCB # 51679380 (TP-S30-HB) 1 &1/4" long shaft, number 8+ condition
(2) Locking Hubs. Brown/Grey color. 1 hub has worn center. Still work well. Used very good 8+ condition. (priced indvidually. 30 for worn one, 40 for unworn)
7 watt. With motor drive speed board 51675661. Used in many models, probable A3440S and 22-4. Board parts are set for 7 1/2 15 IPS operation but resistor changes can make 1 7/8 3 3/4 etc. 9 condition.
Contact us about similar items or replacement parts.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
For Tascam Model 38 and others (388, 3440, 48, 58, etc). Send a picture of the pulley you need to verify the match. Condition: 9
For possible A7300 or A6100 series. Please include a picture of your part so that we may match it up for you as we are not sure of the model use. 8+/10 condition, pinch roller is 8/10 condition on cast metal arm and pivot usable. OK pinch but rare version.
2 TRACK (1/4 Inch) Rec head for possible use with Pioneer, TEAC, and Technics. 16.5 ohm impedance #9+ condition, like new! Has Base plate for use of 2 screws very typical of japanese Reel to Reel heads
Tape is becoming sticky and will shed, but it's still usable. Good #7 condition.
Contact us about similar items or replacement parts.
Feet. with screws. 16mm. "bracket " design Will fit x1000 and similar units. (priced for the pair) #8 condition.
Special logic IC for Teac X1000R, IC 5220803400, Part probably is good, was salvaged, not certain, Condition #8 (Audio Pro in house use only!)
Contact us about similar items or replacement parts.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
#5534692001 X-7 R. X10, X20, X1000, X2000, A4010, A1200. Custom high spec belt for capstan motor to drive capstan. Original Teac part, new stock.(1) available $24 each.
Good Condition, (2) available, belongs to X300-R and Tascam 34 as well, Condition #9
Most parts are available, please call.
Complete head block assembly with six heads. Heads have about 20% wear with an excellent wear in pattern. It is a good idea to replace all heads at once if some heads are worn out. Very good condition.
Auto spacer control fader. 100KB. With knob and button. #9
Take-up break band. Complete with mounting hardware, spring, break guard and screws. Used. #9
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
VU meter, black background with white lettering. 2 3/4" x 1 5/8" x 5/8". With working meter lamp. Tested and working in excellent condition. #9
Caps for pinch roller with one spacer washer for each. Black, 1 1/8" diameter. 2 available. $18 each.