Intact machine works, but for sale as is or for parts. Unit has seen a lot of use and had been serviced recently with new or excellent condition parts installed, but further clean up required. 1 play head #9 $40, 1 record head(RP102-2902) #9 $40, 1 erase head #6 $10, 1 head cover #9 30, 1 main round belt #9 $22, 1 forward idler #9 $18, case #8+ $20, meters #9 $18, top face #9 $22, drive capstan idler #9 $24. No front cover. Call for more parts.
With cap and 2 washers. #8+ Condition.
Contact us about similar items or replacement parts.
2 reel tables $18 each, 1 head cover $22, 8 record play boards (tested calibrated) $14 each, 1 pinch roller 9/10 condition (with washer and cap, but will not fit tight - pinch roller must be locked on with c clip or tight washer.) SOLD.
(Arm #1) Back tension arm only with nut, obvious wear on arm, has black finish tip for Tape guide (screw on) #9 Condition $36--------(Arm # 2) Old version, all metal, has minor stains, arm only no nuts to mount, #8 Condition $20 For models 2300, 2300 SD, 3300 series & 3400.
Complete machine for parts. Side boards SOLD; heads SOLD; pinch roller cap $12; head cover $24 ; feet $12, reel table $28- only 1 available, Front & back tension arm SOLD, No Belt, No front tape lifter, Other parts available upon request, all in very good to excellent #9 condition.
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
Parts: pinch roller - call us, upper face 1/8" dent in corner #9 cosmetic condition $24, motor $24, lower face small bend in lower right corner #9 cosmetic condition $38, 2 piece knob set #9 condition $10, reel table #9 condition $56, head cover #9 (SOLD) condition $48, top cover #8 condition $24, brake bands $20, boards available - call us
1/2" NAB style reel with tape, 10" flanges. Minor stains, small stickers can easily be removed, #8+. 14 available. Assume SOLD Paperwork and product probably gone.
Contact us about similar items or replacement parts.
Complete machine. Unit was calibrated and serviced in 9+ condition but some strange logic problem occurred. No flutter rollers, No belts, No head cover, No handle. All boards were calibrated. Heads are in perfect condition. Call for individual parts and prices.
record head, #1G20A, ( IG20A ) 1/2 track, stereo, 1/4" tape, used, 80% good, condition 8
Contact us about similar items or replacement parts.
power switch. #9
Contact us about similar items or replacement parts.
Reel hub motor. EM 1543. 700028. DC 10/24 V. CCW, CW, Lot 2010 400. Has original reel table mounting pulley. Has original timing pulley. Has 12 inches of organic wiring harness. Salvaged from working unit. Condition #9
Contact us about similar items or replacement parts.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
Most parts are available, please call.
Barely used, #9+ condition, 5% wear.
Contact us about similar items or replacement parts.
For model 38 and 48 and 58 . Rebuilt, new rubber, 10/10 condition.
Contact us about similar items or replacement parts.
All parts salvaged from a low use machine and in excellent #9 condition unless otherwise noted. Tape roller: $38; Tape roller cap: $12; Flutter roller (#8 condition): $28; Flutter Cap: $14; Output control 100KAX2: $18 2 track play head (#8) $118; 2 track Record head (#8) $118; (heads can be lapped perfect for $30) 2 track Erase head #9 $68 .
Sony pinch roller, #3-430-233-XX. (Made in Japan, for various models. Inquire for details). 1 in stock for TC 355 New #10 condition ( Another pinch roller is available our listing 46724 )
Contact us about similar items or replacement parts.
left side large flutter roller, condition #9 - $22, hardware kit for head shroud, long screws, etc... - $12, (2) tape guide flutter rollers, condition #9 - $34ea, (2) flutter roller caps (black) - $16ea
All Remotes are now 25% off or Free Shipping!!! (Reel to Reel remotes excluded).
Used, in #8+ condition. Refurbished nicely, rubber roller, check for tape path tracking.
Contact us about similar items or replacement parts.
reel motor. 53700057-00. 24VDC 5W. #8
Contact us about similar items or replacement parts.
Meters RAW-061-0 (Left Meter - Bad bulb, spots on meter face) $24, RAW-062-0 (Right Meter - Bad bulb, 9/10 condition)) $24. Customer can swap best meter "glass".
#53700057, tested, low use, can be made available upon request , $66
AC-Cord 15A 125V. #8+ condition.
Contact us about similar items or replacement parts.
Edit speed switch board #PB9A563A, PB-78HB. Complete circuit board with all buttons and button frame. Excellent condition, salvaged from good condition machine.
Contact us about similar items or replacement parts.
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
No table top, no tape. For all Otari 5050 series. Very good condition. ( M.I.S !! )
Contact us about similar items or replacement parts.
play head, #1222, 1/2 track, stereo, 1/4" tape, used, 80% good, condition 8
Contact us about similar items or replacement parts.