For older models, in #6 condition, but still usable. One side has a short shaft. Value is for roller frame.
4 track head with shield and bracket. 80 percent good, nice wear path. Permaloy head with leads. 8/10 condition.
Contact us about similar items or replacement parts.
Many other models. Idler drive puck. 2 inch diameter. 9/10 condition, used but with very good cosmetic condition.
Black r.r. hub with lock spindle. Design with 3/8" radial spokes at edge. 3 hole black edge. #9 condition
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Usable #6 condition with feet intact and black top vent. Very usable case on the cheaps for someone whose case was damaged. Minor chips on back, missing veneer on front edges. Mechanically intact and sound.
reel to reel for Parts/Hobbyist, auto reverse reel to reel, mechanical works but rt spindle beat, heads worn, speed off.
Axle has two belt grooves, table has five inner concentric rings and three outer rings. 3.5" diameter table. Very good #8 condition.
22-pin female connector measures about 3.7"x.4"; 14-pin gold female connector about 2.4"x.4". Used in excellent condition.
Full board with color coded leads with long switch. Excellent condition.
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
We have many, many parts and boards for Akai reel to reels, including LF5023: $40, KD-A5009:SOLD, LF5026:$18, LF5022:SOLD, LD3141:SOLD, input connector board, KD-A5004:$24, LF5024:$42, KD-A1002:$36, KD-A5003:$30, function play switches, remote connector:$12, reel tables:$26, reel brake hubs:$14, 100KOHM AX2 CONTROLS:$12, tension arms, 24XO-MR motors, counter mechanics, and many more. Most boards and parts cost about $12 to $48 each and usually include shipping. We will dismantle this unit and set prices, the MS-5022 is the most rare and demanded board and can get $88. However check the little IC# you require and we may have it as a separately listed part.
Left and right break assemblies for Akai reel to reel machine. 8" bands. Very good #8 condition.
Fits better w/ GX Series, but not certain. 17" wide 17&10/16" High 2&1/8" deep. Akai logo in white lettering upper right hand corner. Soft plexiglass type cover w/ hinges (clip on type) on left side. right side broken. good condition, no major scuffs, but some small scratches; cover could be buffed. Read dimensions carefully. Condition 8-
3 speed motor with pulley. Type: HC-16X. Low use, #8+ condition.
Contact us about similar items or replacement parts.
MS-5025. Salvage from low use machine. Condition: 9
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Complete machine with excellent cosmetics. Missing pause knob and head cover. Heads look good! May need minor polish $88/ea. Call for individual parts or to buy whole machine. NO REEL TABLES OR PINCH ROLLER.
Has original brushed aluminum cap, original washers, salvaged from low use machine, 8+
7.12.8, GX-R, Glass ferrite head, salvaged from low use machine, 9
Contact us about similar items or replacement parts.
Reel table only, with stem. Condition: 9
Contact us about similar items or replacement parts.
Black background with silver markings. Bulb shows 4 ohm continuity. 3 mounting screws. Salvage from low use machine. Some discoloration on aluminum trim and light scuffs on clear plastic. Condition: 8+
(2 available,priced per each) Tape deck heads, P4-202, 1 head has very slight wear at only the guard band spacer, 4 screws, these heads are similar to many others used by Akai but with a better version spec, You must send us a picture of your head and maybe this can fit, very minor wear #9 condition
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
(1) Set off head bracket holders Frames screw 3 holders, no reel tables, no pinch rollers, no heads, no screws
Tape Deck Head, side by side for reverse/forward operation, #9 Condition
