Very unusual, "stealth like" look, black color. Excellent condition.
Bizarre "stealth" counterweight for custom Yamaha turntable. Has three holes to accomodate the back end of the tone arm runners. With small calibrated arm weight. Used in very good #8 condition. This is a very rare counterweight!
#SFDPD2NO1A, Same as many Technics, Spindle cycle gear is cracked, repairable on request, Unit has special AN6639 motor IC, Condition #8 - $28 - Call for availability
Headshell $16, Counter weight $18, Platter mat $14, all items Condition #9,
Dust cover only, no hinges. 16" wide by 12.5" deep by 2" high. Excellent #9 condition, almost new.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
We have many idlers available. To request a part, please contact us with a picture of what you want to replace. Good rubber parts in excellent or like new condition!
2 black, snap position design hinges. Slip in stem. 2mm wide at base, 4mm wider insert to cover. @ small cut holes at base of stem. #9
(2) Available, 1 1/2 inch wide base, 2 hole mount, curved top, 3 hole mount, condition # 9
Light brown. Missing 1 foot. #8 condition.
Walnut base for Dual 1219. Base has been repaired but is slightly off. May not fit dust cover correctly, but the wood look is excellent. Very good #8 condition. Call for more details.
Main power switch for many types of Japanese turntables.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
9v DC motor, CCW rotation direction, with wire leads, board, and brass pulley. Matsushita MMI-6S9RWH. Excellent condition, tested good.
For various manufacturers and models. Includes board #N-83 and wire leads. Excellent condition.
with 1 3/8" brass pulley on shaft. Possibly for a Philips turntable. Excellent condition, tested good.
For Audio-Technica and other turntables. 9.12vDC. Excellent condition, tested. We are trying to find alternative motors, please contact for other possible motors.
Contact us about similar items or replacement parts.
#77150. Excellent condition, tested.
Contact us about similar items or replacement parts.
To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
3.25"x2.5" outer shell dimensions, with three mounting posts. Includes pulley and color coded leads wired to connector. Very good #8+ condition.
Pair of slot insert hinges used in many modern, inexpensive tables. 1 1/2" by 1 1/8" plate fits into cover, 1 1/4" fits into "T" slot on table base. All plastic construction, black color.
Half moon front, black color. About 1 and 5/8 inches in length. B111940 marked on bottom. Excellent #9 condition.
Counterweight substitute. Looks very similar. Condition #9.
Excellent condition, salvaged from low use machine.
If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
We have many counterweights available for all types of turntables, including Kenwood, Pioneer, Sony, Yamaha, and many more! Most are available for $8 to $20. Please send us a close up picture of your turntable and counterweight and we can supply the correct item.
Wand/Tonearm "pipe." For Thorens TD110, 115 (and others). Includes: Cartridge mount hardware, alignment gauge, mirror. Like new - not used. Missing original outer carton. Condition 9+.