Digital audio workstation control, with 7.5 VAC power supply model no PS-P428. Includes software CD & owners manual. From working studio but not tested at Audio Pro. Needs cleaning, visible cosmetic wear. #8-
8x4 Mixer. Insert Loops. 3 band sweep midrange. XLR Phone In/Out. No phantom supply. #9 condition.
(3), possibly for parts or repair; mostly parts. Average cost of parts will be $8-$14. Motors will be $32. 7-8/10 condition.
4 channel 3 band EQ sweep mid and low freq. Hands on color coded knobs. Excellent condition, original box and packing. Used - somewhat worn, main mixer unit is available that was designed for use with this series.
8 channel mic preamp, add on 48v power, extremely high gain low noise full bandwidth mic pre, 2 space rack unit, excellent conditon
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Expansion Mixer. (8 channel card/ boards) (in place) on 12 module rack. Missing some EQ knob caps. Faders feel to be OK. Can be made functional working unit.
Faders, 50K AX2, can substitute for 10K AX2. Special stereo. Will require different knob cap. 4 terminals and 2 terminals at ends. 3" long. NEW
12x8x2 Broadcast mixing console, 12 mic pre, 8 line in, 8 tape monitors, 8 ind assign buss, full dual assignable VU meters (8), 2 stereo aux bus, 3 band sweep EQ, PFL and in place solo + med. Throw faders, 8 sub groups out, 2 stereo mix buss, cleaned and tested OK
12 channel 8 bos board. 8 V/U meters. Mechanically intact, cosmetically intact. Available for parts or can be serviced and restored to full working order. Dents in wood side panels. Minor wear. 8+ condition.
Mic+line input, Insert/Direct out/Tape in, 8 bus, 6 Aux, 4 FX return, 48 V phantom power,4 band EQ, talkback, 2 VU meters, has full power supply and manual, Dimensions- 54"x 38"x 12", great condition as it was only used in a home studio for a long time, only is 1 channel is bad and 1 module is failed. Condition #8 PRICE IS NEGOTIABLE
20x4 console, 2 band sweep eq, 1 band fixed, 3 send lobg stroke quality faders, no phantom 48 supply 48v supply. High quality construction board - 4 buss out.
Contact us about similar items or replacement parts.
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
8 Channel mixer, XLR Mic In with 48 Volt, 4 Buss, RCA Buss In For Tape, 2 Aux, Inserts all channels, effect send, direct outs, line in, XLR in, inserts, 3 band EQ 2 Mid, bass sweep meters 110mm faders complete clean all controls switch 9+ Condition Excellent + best quality board.
Contact us about similar items or replacement parts.
16x4 mixer, 1 fx send, 2 fx return, 16 xlr (no 48v phantom power - external 48v available.), 16 1/4, 16 insert, ch 1-8 rca tape in, high quality mic pre's. This is an excellent mixer, superbly built, that has been fully serviced and cleaned. Mods have also been done to lower noise floor including modified ground and additional filtering to power supply. Mechanically and cosmetically this board is clean, servicable, excellent design and parts quality ensure top performance and reliability, knobs, faders, and meters are in excellent condition, some tape on the edges on the wood sides, #8 condition
Contact us about similar items or replacement parts.
Tascam EX-20 Expander, 4 channel, XLR/Phono I/Os, Bus I/O (phono), phono dir out, Trim/Aux/Aux pan/Pan each with own volume / Tascam PE-20, Parametric EQ, all phono I/Os, High/Mid/Low pots with levels, 4 channel - - **$150 for the pair**
EX-20 Board Expander 4 mic ins, (integrated 3 pin cable connector). This unit is powered by the PE-20 . Hands on color coded knobs, excellent condition 9+ with original Box, no styro packing.
Contact us about similar items or replacement parts.
soren 3 1/8" hole mount, Can be used in Tascam 388. Has slider stem which is longer , but could be trimmed with cutters to fit Tascam red knob cap. (not included) New #10 condition (2) available priced each
Check us out on facebook.
50k x2 has stem which can be cut to fit orange knob (knob not included) #9 condition
25KB x2 substitute for 388 red knob control and other mixers. (knob not included) Tested good, #9 condition.
4 buss fader 10k ohm A. Near perfect match to original, orange knob control stem is longer than standard, so knob will sit higher, or the stem can be trim cut to exact height. (knob not included) Also used in other mixers #10 condition NEW
Can be used in Tascam 388 for Stereo Master (will fit red knob -not included) N.O.S. #10 (2) available priced each
Knobs and buttons are $3 each. Limited supply!
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Pro DJ Mixer, 2phono 2line 1mic, 2ch, 3 band eq per ch, variable x-fader & volume fader curve, x-fader & volume fader reverse, high quality fader (won't get scratchy)
Dual CD DJ Mixer station, for parts or rebuild. Very low use; one disc DJ pad is not functional. Operates USB/12V DC. Condition: 8-