Audio Proz Service and Sales

eBay Facebook

Category:

Turntable Parts
( 855 Turntable Parts sorted by Price High to Low.)
Image 1 Image 2
Filter Results:
Image 1 Image 2
Filter Results:
Dual 1225
# 60604
Wooden base. Fits many models (1209, 1215). With bottom panel. Need better feet installed. Wood base needs oil, but veneer nice/intact. #7 condition.
$ 28
Contact
Micro Seiki MB-10 Platter
# 73073
Metal platter. Very slight haze of oxidation. Easy to clean up. Condition #8
$ 28
Contact
Thorens TD165 Counterweight
# 58339
Silver with black gram dial. 9 condition.
$ 28
Contact
Technics Head Shell
# 53519
For all consumer and pro T. T. With lead. #9 condition.
$ 28
Contact
KLH Model 20 Gerrard
# 61511
#40-60, 100-130V 0-14A, 10W motor, good condition, #8
$ 28
Contact
If you are calling or e-mailing about a motor, especially one that is rare or not specifically listed on our site, please include as many of the following details as possible: the direction the motor spins (clockwise or counterclockwise) when looking down the shaft, the voltage, and the diameter of the axle shaft (measured carefully). Also, a photo of your old motor is very helpful.
Sanyo TP 1012 Counter Weight
# 72611
Silver with black dial & white numbers. 0 to 5g. 1, 3/16" diameter, 3/8" center hole. #9+ condition.
$ 28
Contact
BIC 960 chassis
# 48416
Chassis only, no dust cover or base. Can be serviced or sold for parts.
$ 28
Contact
Dual 1009 for service or parts
# 48420
#8+ condition base and dust cover available, $22 each. Head shell, $28. Excellent cosmetic machine in need of service.
$ 28
Contact
Dual CS 616 Q, CS 1268 and others
# 55413
Counterweight. Brushed aluminum finish with dark grey insets. Salvaged, like new, 9 condition.
$ 28
Contact
Dual 1019 (and others) Counterweight
# 54746
Condition: #9
$ 28
Contact
Gerrard #40B
# 53434
Turntable motor with brass 4 speed 60Hz pulley. Low use. #9
$ 28
Contact
Dual CS-616Q Dustcover
# 54086
Amber colored dustcover. Light scratches with buffing. 8- condition.
$ 28
Contact
Micro Seiki DD-20
# 59350
Rubber platter mat (large center hole 43/4 inch) by design. Nice clean condition #8+
$ 28
Contact
Matsushita MMN-6F6 6v turntable motor
# 49401
Used in very good condition, tested.
$ 28
Contact
Dual Pulley- 50 Hz
# 71839
3 speed, 4 mm shaft, used good condition, #9 Condition
$ 28
Contact
Used Cartridges: We have many used cartridges which have all been exchanged here for upgrades. They are all tested and working perfectly. Some may need a new stylus.
Thorens TD 146
# 50833
Counterweight. #9 condition.
$ 28
Contact
Philips motor 43220107114 W02-005
# 49616
With aluminum pulley and three rubber stands. Excellent condition.
$ 28
Contact
Philips motor 432201071113 W02-844
# 49618
With aluminum pulley. Excellent condition.

If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
$ 28
Contact
Philips motor 432201071114 W02-920
# 49620
With aluminum pulley and three rubber grommets. Excellent condition.
$ 28
Contact
Philips motor 432201071114 W02-910
# 49621
With aluminum pulley. Excellent condition.
$ 28
Contact
FP 20/4s WL
# 49931
Motor, color coded leads wired to connector, 3 1/4" x 2 1/2" outer shell dimension with pulley, 3 mounting posts #8+ condition
$ 28
Contact
AIWA LX-100
# 56112
Tone arm motor and assembly. For linear tracking LX-100. Assembly includes wire, gears, pulleys. Motor # MDN-7R4. 12-volume. Needs belt. Wiring harness intact. Salvaged from working unit. Oiled/tested. 9/10 condition.
$ 28
Contact
Miracord 650 driver idler 10-452U56
# 50121
1+7/16" diameter drive idler, probably fits most Miracord model tables. Excellent condition, two pieces available.
$ 28
Contact
Black metal dust cover hinges
# 50134
Priced per pair at $28 with 3 pairs available, and 1 single for $14 ,Yamaha JVC ETC, Dust cover Hinges. Black Metal. 1 1/16"X1" Slide into. 1 5/8"X1 3/4" Screw onto. 1" Distance between screw points. Has add-on plates to reinforce dust covers.
$ 28
Contact
Brown metal dust cover hinges
# 50145
Fits Pioneer PL-50, possibly for Pioneer PL-12. Excellent condition. Please show us a picture and measurements when requesting hinges. (3) pair available, priced per pair
$ 28
Contact
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business.
We strive to offer good products at competitive prices.
While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run.
We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Technics SL-1200
# 54005
Slip mat heavy rubber. 9+ Condition.
$ 28
Contact
Thorens TD165
# 58326
Anti skate weight, wire. 9 condition.
$ 28
Contact
Dual 1219/1229 Dustcover Hinge
# 54753
Chrome dust cover hinge. Attaches to wood base. 6 1/8" long, two screws attach to cover. #9 condition.
$ 28
Contact
Dual 1209 Counterweight
# 54306
Dual 1209 Counterweight. 9/10 condition.
$ 28
Contact
Thorens 160 turntable mat
# 43888
Fits 147, 166, and many other models. Excellent #9 condition.
$ 26
Contact
BIC turntable cam gear
# 45384
(1) Red gear, 3-3/4" diameter with leaver and return trip mechanism. for Model 920 only -all pins and gear teeth intact. Very good #8 condition
(1) Red cam gear 4-1/4" diameter with leaver and return trip mechanism for models 940, 960, 980, 981, gear teeth all good, (1 pin broken -can be modified for use). #8 condition Units priced each
$ 26
Contact
Dual 1209, 1219, many others
# 71753
For 4mm motor shaft, 3 speed pulley, #9 Condition
$ 26
Contact
Sony PS-LX300H
# 56378
Platter. Heavy duty aluminum platter. Salvage from working unit. Condition nice #9
$ 26
Contact
Technics SL-BD1 Motor IC BA6301
# 51155
New part, integrated circuit used for motor speed board.
$ 26
Contact
Connoisseur BD-2 /BD-2A Platter Belt
# 61201
New belt, 32. 2" round, c/s:070, A032 Belt, (PRB #OA 32. 2), Condition: 10
$ 26
Contact
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $24-$26 to ship for anything larger than an envelope.
Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Dual 1209 Base
# 58765
Price reflects low condition but useable. 13 3/4 X 15 3/4 inch frame at top surface area. Slick slightly expanding structure from base. Single black stripe design. 7+/10 condition (hardwood needs to be refurbished but overall nicely intact).
$ 26
Contact
Dual 1249 Counterweight
# 54862
Counter weight for Dual 1249 and others, with long shaft. Condition #9
$ 26
Contact
Technics Headshell
# 58300
Original Professional Headshell. 9/10 condition.
$ 26
Contact
Dual 1237
# 52855
Platter, mat and single play system, condition 8+
$ 26
Contact
dust cover hinges
# 49996
Pair of black metal hinges that slide into base and dust cover clamp. Measure 1 13/16" x 15/16" and 3/2" x 7/8". Very good condition. If possible, please show us a picture of your existing hinge parts and spacing dimensions when requesting hinges.
$ 26
Contact
Dual drive idler
# 50120
Large version (2+3/8" diameter) for Dual models 1219, 1229, and others. Excellent condition, good rubber. Please note, part may require increasing idler arm spring tension as the spring often weakens with age.
$ 26
Contact
Dual CS 616 Q Platter
# 53820
Brushed aluminum platter. Salvaged from working unit. Condition: 9
$ 24
Contact
Sony/Aiwa?
# 57760
With gears and small cog gear belt 1 1/2" diameter, possible motor for loading drawer of turntable. Show picture of your motor if it has gears. #9
$ 24
Contact
Dual 1237 Rubber Mat 1876 4
# 58045
Rubber mat. 8/10 condition (minor, obvious scuff).
$ 24
Contact
Technics cover hinges
# 42008
1-3/4" hole spacing in cover. 1200 Mark II, In excellent #9 condition.
$ 24
Contact
Sold items are kept on our website as a record of the kinds turntables we have sold or serviced.
Please feel free to inquire if interested in any of these items.
MMN-5C2RA
# 54665
Motor. With board and pulley. For Carrera or other T. T. DC 12V. Salvaged, no use. 9 condition.
$ 24
Contact
Dual 1237 Platter
# 54817
Aluminum platter, no mat. #9
$ 24
Contact
Dual turntable mat
# 43891
For 1209, 1214, 1215. Excellent #9 condition with no scratches.
$ 24
Contact
Dual 1237
# 58046
Metal platter, nice, clean. Condition #9
$ 24
Contact
Dual 1015 counterweight
# 52331
With locking thumbscrew. Square design counterweight. Excellent condition.
$ 24
Contact
DUAL 1237 Cycle Cam Wheel
# 54830
With all levers and platter u-bracket - trip mechanism - copper color levers
$ 24
Contact
BIC solid state drive and speed control
# 45380
#Pico 3, motor speed control board, with two connectors and three trim pots. Three pieces available.
$ 24
Contact
Dual 1219, 1209, other
# 55436
3 speed motor, pulley brass, for 60Hz USA operation, fits 4mm shaft on motor, salvage, #8 condition
$ 24
Contact
Thorens 166 MkII dust cover
# 45586
Has obvious chip size of a quarter #9 condition except for quarter-sized chip in front right corner. Originally from Thorens model 166 MkII.
$ 24
Contact
Bic 980 Dust Cover
# 51318
May fit other 900 Series Bic tables. (17" wide, 14" deep, 4 1/2" tall) Bic logo intact. Please Call us at 617-926-8020 There are slight variations of how base fits BIC Dust covers - Best if you send request with photo of your base and hinges for proper fitting of dust covers. Note: this version cover has a small flange in front that acts as a lift handle. The rear has an extension running the full length, that acts as the hinge and fits into a slot of the base. (additionally it has notches 2 & 1/4"from the side for hinge attachments that are used in some other variations) #7+ condition, cover has many scratches and is foggy, but intact and usable.
$ 24
Contact
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
Gemini
# 58675
Pitch control & board. PC04P012A. Pitch fader and all circuits. 9/10 condition.
$ 24
Contact
Dual 1209 Speed Lever
# 56849
Long shaft lever for selecting speed. Black plastic top. Salvage part, #9 condition.
$ 24
Contact
Dual 1229 and others - main drive idler
# 56838
6mm hole in brass fitting, rubber treated and in good condition. (1407-08) Salvage from low use machine. Condition: 9
$ 24
Contact
Bang and Olufsen counterweight
# 46542
Small weight, fits most modern B&O 8000 series slim line turntables. 1 3/8" long with 1/2" thin shaft and 1/8" hole for shaft. Excellent #9 condition.
$ 24
Contact
Dual
# 52549
Turntable base(fits many models). 16 1/2 x 14 3/16 3. Has walnut vinyl trim 2 3/16" wrapped around top. Has built in spring hinges with gear roller adjustments. Small Dual logo in left front corner. Note: AudioPro sticker stuck on bottom and will need to be removed as it has hardened. #9
$ 24
Contact
Hitachi dust cover
# 46728
16. 75" wide by 13" deep by 2. 5" high. Clear plexiglass, good #7+ condition with many obvious but light scratches (could be buffed to #9).
$ 24
Contact
turntable motor PXM-022-0
# 47293
Excellent condition, tested.
$ 24
Contact
KLH Model 20 and others
# 53415
Turn table motor garrard. With brass pulley. #9 condition. Salvage. Low use.
$ 24
Contact
Dual 506 Series
# 53772
Platter mat. Version with two ridges and a one and a half inch center hole. Condition #8+, minor scuffs at center.
$ 24
Contact
Thorens TD-146 Dust cover hinges (for cover)
# 59172
(1) HINGES. Black plastic about 1 1/2 inch long 1/2 inch wide. (2) hinges for mounting on wood base. $24 each.
$ 24
Contact
Regarding Dual 502 and similar models, be aware virtually no good sounding clone, counterfeit or replacement stylus for older cartridge types exists at this time for Shure, Empire (not great sounding anyhow) ADC, Stanton, Sonus AKG etc.
At this point only a few companies have genuine correct and a clearly better sounding true 3x7 nul stylus as in Audio Technica (best money spent) Grado, Ortofon and Oyster (not too bad of a deal) have real honest good sounding stylus. Some retailers are repackaging a $9 clone stylus at $30 and $90. The retail price does not make it better, it's dishonest. The simple fact is a correctly chosen better Audio Technica cart/stylus at $50 to $120 is a better product sonically than most $200+ price fancy name brand products.
Contact us for ordering information at sales@audioproz.com or (617) 926-8020
KLH 60
# 60588
LDR auto sense for stop. Board with lamp and LDR. #9 condition.
$ 24
Contact
Stanton STR8-20 Pitch Control & Motor MMN-6S6K8
# 57685
6 volt motor: SOLD; Pitch control/board: $24. All in excellent #9 condition. Used in various different similar machines
$ 24
Contact
Turntable motor PFD2R04
# 48273
For various manufacturers and models. Includes board #N-83 and wire leads. Excellent condition.
$ 24
Contact
Toshiba motor MMN-BAC07G
# 48275
Excellent condition, salvaged from low use machine.

If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
$ 24
Contact
Micro SiekiMB-10 Spindel with plastic collar
# 73131
F Mount. Condition 9
$ 24
Contact
Sony motor HC-41431 50173
# 48512
New, motor with wires.
$ 24
Contact
Dual CS 502
# 61601
11. 25" full size rubber mat with aluminium 1. 5" center, excellent condition, center spindle has small rubber nub that protrudes for 33 spindle only, condition #9+ Note: Check your mat carefully. May also fit CS 510. This hole is for "33" spindle only.
$ 24
Contact
Kenwood KD-48F Dust Cover
# 60224
8+/10 condition, very minor cosmetic, scratches, fully functional.
$ 24
Contact
Dual 1015 Idler
# 53140
Reference #50119 for similar part. Needs washer spacer. Condition: 9
$ 24
Contact
Technic 1200 MK II
# 63527
Counter weight, Original. #9 condition.
$ 24
Contact
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Counter weight. Aluminum with knurled knob
# 63346
Black weight at bottom of aluminum counter weight. Imbedded in aluminium shaft offset hole DIA 8mm for arm. Overall size: L= 22mm, Dia= 33mm. Black Wt Dia = 2/mm. #8 condition, used. Has some scuffs and nicks but very usable.
$ 24
Contact
KLH Model 20 dust cover
# 49838
Smaller version dust cover, with slide in pins on bottom edge. L:17. 5" (3/8), W: 13", H:4. 25" (4 3/8"). Requires intact hinge mounts on existing wood base. Very good #8+ condition with some obvious but minor scuffs, very nice functional condition.
$ 24
Contact
AR-XA Wooden Base
# 73887
Wooden base, (no platform) - Veneer lifting at one back corner, otherwise great condition. #9
$ 24
Contact
Dual 1015
# 52661
Counterweight, square with circle knurl knob, condition #9+
$ 24
Contact
Carrera LT120 main function board
# 55434
With HD614120P microprocessor IC and GL324 IC. Complete board. Condition: 9
$ 24
Contact
Dust cover hinges
# 50000
One black metal dust cover hinge, 17/16"x15/16" part slides into base, 5/16" diameter circular mount tab to mount in dust cover. Fits Pioneer PL-15 D II and many others as well. Excellent condition. #9 Condition
$ 24
Contact
Dual 1009 driver idler 12-5131
# 50105
1. 75" diameter Dual idler. Excellent condition. In some cases spring pull tension on idler arm must be shortened to improve idler tension to turntable rim.
$ 24
Contact
Dual drive idler
# 50106
1. 75" diameter driver idler for Dual models 1209, 1214, and others. Good condition rubber, like new condition. Please note, in some cases the spring tension pull on idler arm must be shortened to improve idler tension to table rim.
$ 24
Contact
Dual 1209 driver idler
# 50117
With cast metal arm and articulating idler arm and spring. Complete replacement for bent or otherwise damaged assembly. 1. 75" diameter, good rubber, excellent condition.
$ 24
Contact
Dual CS-508 (Dual part 267-052)
# 62808
(1) Hinge (1 available) Brown plastic dust cover hinge with tension adjustments screws in rear. Used, #9 excellent condition.
$ 24
Contact
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs. We keep our database up to date with over 10,000 items in stock.

If you see a part number and a price, we have that item in stock.

Customers outside of the U.S., please note that international shipping can be costly (US Post $24 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
Dual drive idler
# 50119
1. 75" diameter driver idler for Dual models 1209, 1214, and others. Good condition rubber, like new condition. Please note, in some cases the spring tension pull on idler arm must be shortened to improve idler tension to table rim.
$ 24
Contact
Mitsubishi LT-90
# 53586
(2) Hinges for dust cover. Complete with all hardware. #9 condition. $24 per set.
$ 24
Contact
AR-XA Tone Arm
# 73888
Basic arm with wire, no head shell. Condition: 8
$ 24
Contact
Sony RF-510T and other
# 50955
Motor assembly for linear track T. T. Motor 1-612-670-12 assembly with gear salvaged #9 tested
$ 24
Contact
Unknown Model Pair of Hinges
# 72302
(2) Available, 1 1/2 inch wide base, 2 hole mount, curved top, 3 hole mount, condition # 9
$ 24
Contact

© 2026 AudioProz. All rights reserved.