407, 1/2 Inch Test Tape, Audio Pro Made Tapes *1 KHZ at ODB speed Calibration, Tascam will read -10 db, output, (0-600 Counter), Otari will read -5db on meters, Condition #9
3 Head Deck, best version, virtually unused, new capstan belt installed, pinch roller replaced like new, Heads are #9+ condition, virtually no use time, speed spec perfect, #8 output level is odb meter, -10DB output for consumer line level, (Use LH1LH for Maxwell Tape record) all switches completely cleaned, Unit has supply side roller with proper cosmetic cap replaced, unit works perfect #9 Condition
Contact us about similar items or replacement parts.
Open reel tape recorder, silver/black trim w/ wood side panels, 7.5 in reels, 7 1/2 & 3 3/4 IPS, heads are 90%, large lighted VU meters, 0 DB is at output mark, 2 position bias/Rec EQ, 2 mic inputs 1/4", headphone output 1/4", serviced cleaned and calibrated to NAB standard, excellent calibration speed, minor little wood chips at corners, condition #8+
Contact us about similar items or replacement parts.
Auto reversing 7 inch reel to reel, heads are 95% good, cleaned controls, no rack scratches, needs belt. Condition #9
Mint condition with original box packing and ops manual, 10" reel capable unit, with (2) clamp-on NAD hub adapters (not twist lock kind) 3 3/4 and 71/2 IPS. Full service By Audio Pro, controls cleaned, perfect belts, and pinch roller serviced. calibrated to NAB standard, #8 on output control is 0db standard play back. Super near perfect calibration. High bias & EQ is for 7-1/2 ips, Low bias & EQ is for 3-3/4 ips. # 9 condition
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business. We strive to offer good products at competitive prices. While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run. We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Tape heads worn/corroded, bad pinch roller, all switches, controls, and cartridge board connectors are noisy, broken rec level, unit required new heads general clean lube, unit received with bent knobs, possible parts unit, condition #7
Heads 80% good and good wear path, new belt, new bulbs, all cleaned and calibrated to NAB standard, Set Bias and EQ for Maxel tapes, Unit has minor corrosion spot on left Side of case, no rack rash face 90%, #8 Condition CALL FOR COMPETITIVE PRICING
Contact us about similar items or replacement parts.
Gray face meters, Gray plastic front panel, Multi AC Voltage version, 6 settings, With smoked front dust cover #7 condition, Heads #8 condition, speed board caps replaced, All electrolytic caps (about 20) in audio and power supply replaced, most tantalum on preamp boards left in as they test OK many replaced as needed, high quality version, unit has typical low frequency enhanced bass EQ response of Revox, All calibrated for Maxell UD tape, excellent performance/spec, (unit auto shutoff sensor is weak operation), #8+ condition
7 inch reel to reel. 1 high bias / EQ for 7 1/2 lbs. 2 low bias / EQ for 3 3/4. Recent new belt & pinch roller. Excellent wow flutter. 0 dB playback #7 is 0 dB professional 0 dB level. (10 dB higher than typical consumer). Low use. With Teac front cover with repairer 1 inch. Front arm minor bend. Excellent calibration. Condition 8+.
Contact us about similar items or replacement parts.
Super quality Reel to Reel deck, 7" or 10" reels, pitch control blue FIP meters, Excellent record/ play quality ! New belt, New pinch rollers, Heads 80% good, with excellent wear paths. Audioproz cleaned and calibrated, bias set, board resoldering ruggedized at connectors. Output level#5 is 0 db reference, set Bias for Eq1 & Eq 2, Very good / excellent condition recorder, Faceplate #9- (maybe a littel scuff) 1 broken foot at back. Overall condition #8+
Super Quality Machine, Use as Rental, Calibrated, Condition # 9 (original hard copy MIA)
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
4 Track Recorder , looks intact / untested #8 condition
2 speed Reel Recorder, (7.5 & 3.75 ips.) 7.5" Reels, Walnut side panels, 1/4" mic inputs, 1/4" headphone jack, RCA In/outs, Output level control, Normal/Hi Bias, EQ, Tape/source switches. Take up reel adjusted for more even tape movement. Counter works excellently. Audio Pro cleaned & serviced, calibrated for Maxell Tape, High Bias 7.5 ips, Low bias 3 3/4 ips. Preplace VU Meters, WOW Excellent looking and performing machine #9+ condition.
Contact us about similar items or replacement parts.
Four (4) available, 35-180 UD, Used tape, Tests OK for shedding, Known customer kept tape in good storage, Condition 8+
(2) speed 7 & 3-3/4 ips , 7" reels self locking hubs, mic ins, This recorder does awesome sound & sound echo reverse effects, incredibly excellent record & playback. Total clean / calibrate for Maxell UD Tape. #9 condition absolutely superior condition machine.
Contact us about similar items or replacement parts.
Relay board problematic, good reel table 8+(SOLD), head cover ($28), Heads #7 can be upped to #9($60), Sideboards #7+ (SOLD). Call for other parts ALL #8+ condition
10 Inch 7 1/2 or 15 IPS. Unit Calibrated to pro standard NAB. High Bias and EQ for 15 IPS, Low bias and EQ for 7 1/2 IPS. Set up for maxell UD35 or Ampex 456. Heads 85% good(This means the record/ erase/ play heads on the unit have very little wear, about 10% worn so a good wear path from low tape use is established. This can be a good thing as now the pitch can be more precisely calibrated on the tape and record/ play quality will be excellent for a long time (10-20 years) before heads wear to 50/60% good. Then calibration should be done again) Reels and tables in nice condition. Excellent face but typical light, superficial finger wear. Very clean wood sides. Main belt replaced. All controls and switches cleaned twice. . #8+ condition.
Contact us about similar items or replacement parts.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
PARTS - Failed machine, Heads good, pinch roller worn but clearly still in good condition, Machine appears to have bad capstan motor - Call - possible substitute motor available ($48), all cosmetics parts look good, (Head cover/door assembly - SOLD) Substitute motor $48, 2 erase Heads plus brackets $60 ea, All record heads and play heads SOLD, (See our listing #72894 is playback head for AKAI) 2 Pinch rollers worn but clearly still in good condition, needs basic cleaning $34 ea, Condition #8 Many other parts available, call directly 617-926-8020 we have belts, hubs, tables etc.
Open Reel Tape Deck (1/4 track stereo) 2 speed, 7 1/2, 3 3/4 IPS. 7" Reels, Rec EQ + Bias (high or normal), hiqh EQ/bias set for Maxell. 1/4 mic/inputs w/ level control. Tape/source monitor switch, electronic transport. 80% head life left , good shape, unit calibration very good. Has few scuffs on front panel. #8+ condition
Contact us about similar items or replacement parts.
4 channel Reel to Reel, output and Mic/Line level controls. 4 Nice analog VU meters. Super calibration for Maxell tape 0db is #8 and is pro 0db level out. Fully serviced and calibrated, Excellent condition. #9 condition, needs AC cord attached (no original AC cord now).
Contact us about similar items or replacement parts.
Right tension arm assembly complete, possible replacement assembly can be made available for $58 NOT IN CURRENT STOCK
Contact us about similar items or replacement parts.
Bi Directional Recording, Open reel tape deck. High density ferrite heads, 7 1/2" + 3 3/4 IPS 7" Reels. EQ/BIAS Switch normal/high L, R L+R mode switch. Mic input, low machine in excellent condition. Calibrated extremely well and has hub high performance. Used goof #9 condition. NEEDS SERVICING
1/4 track stereo format, 3 speed recorder 1 7/8, 3 3/4 & 7 ips. Reel tables have twist lock stems Super calibrated (for Maxell) machine on spec speed for 1 7/8 and 3 3/4, slightly 1% slow on 7ips. Excellent wow & flutter. All rubber good, all complete service & maintenance. #9 condition
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
(compact portable reel to reel) Mic 1, Mic 2 inputs, headphone jack, Volume, tone, record, master level controls, peak level meters. Up to 5" reels. Moves tape, FF RR, records heads are clean, rubber belts in good condition (1 belt replaced) low playback output ...probably power supply issue.
4 track 2 channel stereo, auto reverse, pitch control, monitor, rec mode, mic input, we may sell as-is or disassemble for parts, needs pinch rollers, machine has much wear, tape heads are worn but 80% good, motor good, needs new drive belt, #7 (unit dismantled- see our other listings for working reel to reel recorders)
