Classic Mid 70s teac noise redux w/dolby, hooks up between tape deck and receiver/preamp, super spec calibration, excellent fidelity
Contact us about similar items or replacement parts.
Noise reduction module, accessory for 80-8 tape recorder, bag, manual, 16 RCA cables, no warranty card. Known to be in good condition. This unit is priced on request depending on service required. $250 (Tested appears to work, minimal repair, clean up time is spent) - $400+ range (Full restoration everything repaired, all relays cleaned (there are 16 of them!!) tested, calibrated, etc.) These are 30 years old, it is almost a requirement to really perfect. Once serviced correctly these are very reliable and great performing machines. We also do a modification in the circuit which reduces the circuit noise another 4 to 6 db and also reduces the crosstalk, simulsync, playback at high frequency by almost 10 db. A significant improvement. $160 for the modification.
Contact us about similar items or replacement parts.
with rack ears, SN:430309. Converted FV to always on dbx #9+ condition
DBX Noise Reduction rack unit. 4 ch, 16 RCA phono jacks on rear, 4 each (input, output, encode out, encode in), selectable 4-channel NR. Unit cleaned throughout. Excellent condition, minor scratches.
4 channel noise reduction, this version has no FV cable. Converted FV to dbx always on. With rack ears. #8 condition
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
DBX I noise reduction. 4 channel professional noise reduction with 4 channels of direct inputs and 4 channels of direct outputs. 4 ch. encode out, 4 ch. decode in. Completely cleaned calibrated and tested in #9 condition. (Minor scratch top cover/rack rash)
4 channel DBX with rack ears. Cleaned, tested, minor cover scratches. 8+ condition
Modified w/ ground lift switch. Excellent Cosmetic Condition!
Noise reduction system, 1 rack space, 2 channel noise filter, XLR in outs phone in/out. Used as AP engineering sample.
Silver Face, Practically mint condition Dolby C noise reduction
Contact us about similar items or replacement parts.
Phonograph nick and pop reducer. Does not have preamp. INR SYS INVERT/DEFEAT, TAPE MONITOR, SENSITIVITY FADER. AP mod done to improve control calibrating and sensing and filtering the pop or click. Also board has been ruggedized with solder and better caps in power supply. Black brushed aluminum face with wood sides. Minor modification to sensitivity control to lessen audible blanking of audio. Fully serviced, low hours use. 9 + condition. It works good but TNE or Burwen 7000 is a superior design and with my mods it's as good or better than any computer attempt. I worked with Burwen and have upgraded a superior TNE. I am a little famous for this as well as APT products.
Contact us about similar items or replacement parts.
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs.
Encode/decode noise reduction, 4 stereo channels (8 total ins & 8 total outs). This unit works by reducing an incoming signal so that it remains well above the noise floor and then expanding the clean output signal at its original level. No box or manual. Good condition with scratches on top cover and minor rack wear.
Gain reduction, Compressor/ Expander. Tested OK. All switches and controls triple cleaned. Replaced regulator and upgraded main filter cap for regulation. Fully functional unit. Top cover has a fair amount of scratches. Faceplate mostly clean with some signs of use and light scratching. W/ AC adapter (120V AC 60hz 9w, 15v DC 300mA) #8- Condition
Single ended noise reduction. Half rack space. Excellent #9 condition.
Single ended noise reduction, 1/2 rack space, very popular device to quiet guitars or bass/keyboards
4-chan noise gate/expander for pro use. Balanced XLR in/out with unbalanced 1/4 in/out. Key input. Fully tested and cleaned. #9 condition with some minor rack rash. With manual.
Autocorrlator noise reduction system. Dynamic range recovery. Peak unlimiter/down Expander, Autocorrelator. Low freq, calibration controls. Many modifications,crucial capacetor update for better performance and channel to channel spec. ground MOD for super low noise.
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
Auto correlator noise reduction system with Rev 6 modifications, low noise TLO75 IC update, some capacitor update. Dynamic range recovery system. Wood case, vintage knobs. Low frequency calibration. 9/10 excellent condition.
Phonograph de-click and pop reduction device. Rack mount, Rev 5 modification, TLO75 Op amps, Nice Face. condition #8+
Contact us about similar items or replacement parts.
Nick and Tick reduction 2 space rack Unit Modified with control for variable window of tick & pop capture. SPECIAL ENGINEERING MODEL (Rev 5). Stereo phone jack In & Out . Retro Knobs #8+ condition
Contact us about similar items or replacement parts.
Faceplate for KLH Burwen Research DNF-1201A Dynamic Noise Filter. Rack mountable. #8+ condition with minimal rack rash, very minor wear, and all lettering perfect.
Hush (Rocktron) Systems 2 channel unit, each channel has 1/4 inch ins and outs, Threshold, and Sensitivity controls, excellent machine in perfect condition, includes operating manual and power supply
1/4" phone in/out/key. No xlr. Ground lift switch. Threshold release depth controls. 4 channels. 1 space chassis w/rack mount. Power supply ruggedized by Audio Proz. Serviced, cleaned, and QC OK.
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
Dolby D super NR similar to Dolby B but further reduces noise hiss, best to set play level calibration very high to overcum low level signals which may be excessively nose reduced. Can be used as Aphex type presence enhancer, excellent 2 channel calibration (made originally for Nakamichi and JVC).
Excellent condition, works as noise gate - effectls loop. Release, gate sensitivity controls.