Audio Proz Service and Sales

eBay Facebook

Category:

Mixers
( 234 Mixers sorted by Price High to Low.)
Image 1 Image 2
Filter Results:
Image 1 Image 2
Filter Results:
Ramsa Variable Resistor 20KohmA
# 47331
YWAVRA0044A4. New stock, two available.
$ 24
Contact
Clarostat CIB-15
# 61425
Type CIB attenuator in shield For pro sue consoles. *Includes schematic diagram*. 9 very good condition.
$ 24
Contact
Tascam and others 100KD Stereo Master Fader
# 72818
Soren 3 1/8" hole mount, Can be used in Tascam 388. Has slider stem which is longer , but could be trimmed with cutters to fit Tascam red knob cap. (not included) New #10 condition (2) available priced each
$ 24
Contact
ALPS fader 10kA
# 47569
Part 625-10kA, super high quality channel fader. For Soundcraft, TAC, and other English boards. New stock parts, three pieces available. $24 each ORIGINAL PAPERWORK M. I. S
$ 24
Contact
Otari PB9A282 Slider
# 47617
Slider mounted on plug in board. New old stock.
$ 24
Contact
Teac 9155005200 Dual 50k Faders
# 54360
9155005200 Dual 50k Faders. TCI-A265, 4 Leads, Suitable replacement for Fostex part 8240066000. Requires probably hand wire in. Condition: 9
$ 22
Contact
Tascam 388 Stereo Master Fader
# 71964
25KB x2 substitute for 388 red knob control and other mixers. (knob not included) Tested good, #9 condition.
$ 22
Contact
Ramsa Variable Resistor
# 47346
Part: EWK2PAS31848 200Kohm Ax2 150Kohm Cx2 stacked. Long shaft. New stock.
$ 22
Contact
Ramsa Variable Resistor
# 47347
Part EWK2PAS31848 200Kohm Ax2 150Kohm Cx2 stacked. New stock.
$ 22
Contact
Tascam M1016 and others
# 54478
Faders, 50K AX2, can substitute for 10K AX2. Special stereo. Will require different knob cap. 4 terminals and 2 terminals at ends. 3" long. NEW
$ 20
Contact
Ramsa Variable Resistor 20Kohm
# 47343
YWAVRA0048A4 20Kohm Ax2. New stock.
$ 20
Contact
20kC cross fader
# 47807
80mm hole to hole mount for many older DJ mixers. Maybe for ATUS, Numark, or others. New
$ 18
Contact
20KC Fader
# 55217
For Ramsa, Teac, and many other mixers. New stock.
$ 18
Contact
Ramsa Variable Resistor 20Kohm Ax2
# 47332
YWAVRA0024A4 Excellent condition, two pieces available.
$ 18
Contact
Ramsa Variable Resistor 20Kohm Ax2
# 47335
YWAVRA0024A4 Excellent condition, two pieces available.
$ 18
Contact
Tascam 388 Stereo Master Fader
# 72310
50k x2 has stem which can be cut to fit orange knob (knob not included) #9 condition
$ 14
Contact
Soundcraft 10k control with switch
# 51693
For Soundcraft and others. 10k with switch. O Meg 4A. 2S. New.
$ 14
Contact
Soundcraft DC0219 Control
# 45439
Three layer control. New, unused.
$ 14
Contact
Ramsa Variable Resistor 20Kohm Ax2
# 47330
YWAVRA0048A4 New stock, two pieces available.
$ 14
Contact
Soundcraft dual control 10k Linear A
# 51692
For Soundcraft and others, manufactured by O Meg. 10k, Lin A. New
$ 12
Contact
Tascam 5KD fader
# 72679
#10 new condition
$ 12
Contact
Pioneer DCV1005
# 46003
New stock, one piece available.
$ 12
Contact
Ramsa Integrated Circuit
# 47336
MN6742SDR New stock.
$ 12
Contact
Alps 20KC fader
# 47349
Probably for most Japanese mixers, such as Ramsa, Tascam 388, Yamaha, etc. New stock.
$ 12
Contact
Ramsa Variable Resistor 20KohmC
# 47340
YWAVRA0044A4 20Kohm Ax2. New stock.
$ 10
Contact
TOA line transformer
# 47956
Chrome, 4" long, octal pins. Excellent condition. Three pieces available.
$ 8
Contact
Fostex Fader 8240157000
# 47891
2kA. New stock
$ 8
Contact
Fostex Fader 8240156000
# 47890
200k Ax2. New
$ 8
Contact
10k Log C OMEG potentiometer
# 52051
For 1980's era products, originally for Soundcraft. Three pieces available, new stock.
$ 8
Contact
Fostex Fader 8240050000
# 47892
20kA. New stock
$ 8
Contact