Four channel, four track analog simulsync tape deck. Takes 7" reels at 3. 75/7. 5 ips, Bias 1 EQ 1 for high speed, Bias 1 EQ 2 for low speed. Calibrated for Maxell XL1 tape, 250nW standard. All channels carefully calibrated within +/-2dB at 50Hz-18kHz. Excellent condition with very little use time!
4 Track, 7 1/2, 3 3/4, 1/4 inch, B Unit repaired, all cleaned & calibrated. Good Heads**** Unit has limited calibration control but records play excellent. Bias for Maxell UD 35 90. 1 case screw missing. Condition 8+
4 Track Stereo Tape Deck w/ original manual, Problematic solenoid, Microswitch buried deep in unit, More labor required, Low use machine, Call for Parts 617-926-8020, Condition: 7.
4-track, two speed reel machine with 10" reels (no NAB hubs). Completely cleaned and serviced by AP, calibrated for Ampex/Maxell tape. Excellent condition heads #9, very good cosmetics with some minor wear on wooden side panels. Overall #8+condition
1/2 inch tape: Many reels available. Nice but obvious use wear, with writing on some reels: ($12); Better condition and clean with minor marks: ($18). (no boxes) #8 condition
1/2 track Record & play, 1/4 track play only. Excellent condition, virtually no use time. 15 or 7 IPS. With phone jack and mic inputs. Excellent record and play performance, 20KHz+ response. Excellent wow and flutter specs. Professionally cleaned, serviced, and calibrated. Bias 1 for Maxell UD 35, XLI 996, 499. Bias 2 is a slight under bias, 2db HF rise.
PARTS - Failed machine, Heads good, 2 pinch rollers worn but clearly still in good condition, Machine appears to have bad capstan motor - Call - possible substitute motor available ($48), all cosmetics parts look good, (Head cover/door assembly - SOLD) Substitute motor $48, 2 erase Heads plus brackets $60ea, All record heads and play heads SOLD, Main level control knob SOLD, (See our listing #72894 is playback head for AKAI) , needs basic cleaning $34 ea, Condition #8 Many other parts available, call directly 617-926-8020 we have belts, hubs, tables etc.
4 track 2 channel stereo, auto reverse, pitch control, monitor, rec mode, mic input, we may sell as-is or disassemble for parts, needs pinch rollers, machine has much wear, tape heads are worn but 80% good, motor good, needs new drive belt, #7 (unit dismantled- see our other listings for working reel to reel recorders)
For Parts or Service. Auto Reverse. Excellent condition, but unserviced. Basic switch cleaning done. Needs belt. Great for hobbyist who wants an inexpensive reel to reel. Has one channel out (preamp in). 8+/10 condition.
Excellent front panel cosmetics. Minor side panel wear. Analog dual stereo meters on front. 1/4" inputs on front. Can run 7" and 10 1/2" tape reels. RCA in/out on back panel. Completely intact machine, but it has a cracked preamp board. Call for details.
Good front panel cosmetics, runs at 1 7/8, 3 3/4, or 7 1/2 ips. Sound on sound capability. Two 1/4" mic inputs on front. Stereo analog meters on front. Input for optional remote on rear. RCA in/out on side panel. Minor scratches on top and sides, left rell arm bent. Unit is being sold as is for parts or to hobbyist.
Excellent front panel cosmetics, minor dings on side wood panels. 7 1/2 and 3 3/4 ips speeds available. Low noise and wide range recording options. 2 1/4" mic inputs on front, RCA ins and outs on back (stereo). Connections for optional remote on back. High current draw on start up.
This is a unit for parts or repair only. It would be fixable in the hands of a good tech but we simply did not want to invest our time in it. Best to call for a more detailed description.
We can make calibration tapes for 1/4 and 1/2 track machines on brand new tape. Just drop us an email request at sales@audioproz. Com and be sure to include you model number.
Super quality Reel to Reel deck, 7" or 10" reels, pitch control blue FIP meters, Excellent record/ play quality ! New belt, New pinch rollers, Heads 80% good, with excellent wear paths. Audioproz cleaned and calibrated, bias set, board resoldering ruggedized at connectors. Output level#5 is 0 db reference, set Bias for Eq1 & Eq 2, Very good / excellent condition recorder, Faceplate #9- (maybe a littel scuff) 1 broken foot at back. Overall condition #8+ (VINC MACHINE)
4 track simulsync 1/4 inch tape. Pitch control. Metal Reel, Pitch Control, Hub Adapters, All channels within 1db tracking. Complete clean calibrate (1 meter replaced) 8/10 Condition, heads are at 85%, no feet on back or bottom #8+ Condition
Tape heads worn/corroded, bad pinch roller, all switches, controls, and cartridge board connectors are noisy, broken rec level, unit required new heads general clean lube, unit received with bent knobs, possible parts unit, condition #7
Large reel, 7 1/2 and 15 IPS. High speed semi pro version 1/4 Track. Stereo format. With pioneer hub adapters in pioneer road travel case. Bias 2 for high speed, bias 1 for 7 IPS. All clean. Calibrated. Modified for better HF EQ. NICE. 9+ condition. Speed runs 1% fast by design.
8 track reel to reel and 8 channel mixer, 3 band eq, 1 fx send, each mixer channel switchable to mic/line/rmx. This unit is not currently for sale, (vinc personal unit) PS update, calibrated, 250 NW standard, Heads 75% good. we do service, sell and have parts for these machines.
1 inch tape, 24 recordable tracks, DBX, RCA ins/outs, #9 condition, great condition with original box and packing, fully cleaned and serviced with 80% or better condition heads, fully calibrated to modern industry standards. New lower price! repair of minor problem in motor
8 track 1/2 inch reel to reel. Function select buttons for each channel. VU meter for each channel. Unit has had ruggedized motherboard re-soldering ($200 value job). Ampex 456 calibrated, +/- 1 db all channels. Fresh pinch roller. Heads low use 9/10 excellent condition. Missing badge, mismatched hardware. Mechanically perfect. 8+/10 condition.
Gray face meters, Gray plastic front panel, Multi AC Voltage version, 6 settings, With smoked front dust cover #7 condition, Heads #8 condition, speed board caps replaced, All electrolytic caps (about 20) in audio and power supply replaced, most tantalum on preamp boards left in as they test OK many replaced as needed, high quality version, unit has typical low frequency enhanced bass EQ response of Revox, All calibrated for Maxell UD tape, excellent performance/spec, (unit auto shutoff sensor is weak operation), #8+ condition
