4 channel Reel to Reel, output and Mic/Line level controls. 4 Nice analog VU meters. Super calibration for Maxell tape 0db is #8 and is pro 0db level out. Fully serviced and calibrated, Excellent condition. #9 condition, needs AC cord attached (no original AC cord now).
Contact us about similar items or replacement parts.
4 Track Recorder , looks intact / untested #8 condition
1/4 track. Low use time. With 10 inch hub adapters. Heads are 80% good. Set up for Ampex 456. Maxwell UD quality rec, play. 7 1/2 1 ps Bias/ EQ. 3 3/4 Bias 2 EQ2 cleaned twice over. Calibrated, #9 condition.
Contact us about similar items or replacement parts.
10 Inch 7 1/2 or 15 IPS. Unit Calibrated to pro standard NAB. High Bias and EQ for 15 IPS, Low bias and EQ for 7 1/2 IPS. Set up for maxell UD35 or Ampex 456. Heads 85% good(This means the record/ erase/ play heads on the unit have very little wear, about 10% worn so a good wear path from low tape use is established. This can be a good thing as now the pitch can be more precisely calibrated on the tape and record/ play quality will be excellent for a long time (10-20 years) before heads wear to 50/60% good. Then calibration should be done again) Reels and tables in nice condition. Excellent face but typical light, superficial finger wear. Very clean wood sides. Main belt replaced. All controls and switches cleaned twice. . #8+ condition.
Contact us about similar items or replacement parts.
Four channel, four track analog simulsync tape deck. Takes 7" reels at 3.75/7.5 ips, Bias 1 EQ 1 for high speed, Bias 1 EQ 2 for low speed. Calibrated for Maxell XL1 tape, 250nW standard. All channels carefully calibrated within +/-2dB at 50Hz-18kHz. Excellent condition with very little use time!
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
Open reel tape recorder, silver/black trim w/ wood side panels, 7.5 in reels, 7 1/2 & 3 3/4 IPS, heads are 90%, large lighted VU meters, 0 DB is at output mark, 2 position bias/Rec EQ, 2 mic inputs 1/4", headphone output 1/4", serviced cleaned and calibrated to NAB standard, excellent calibration speed, minor little wood chips at corners, condition #8+
Contact us about similar items or replacement parts.
Dolby circuit version Reel Deck, L/R mic inputs, mic, line, output controls, high/low speed. Calibrated to Maxell UD or XL Bias 1 EQ 1. Excellent calibration, heads 85%. Cleaned interior/exterior of unit, cleaned/lubed all switches, jacks, pots, controls. Installed 2 new hub break pads. 8+/condition, excellent cosmetics.
2 speed Reel Recorder, (7.5 & 3.75 ips.) 7.5" Reels, Walnut side panels, 1/4" mic inputs, 1/4" headphone jack, RCA In/outs, Output level control, Normal/Hi Bias, EQ, Tape/source switches. Take up reel adjusted for more even tape movement. Counter works excellently. Audio Pro cleaned & serviced, calibrated for Maxell Tape, High Bias 7.5 ips, Low bias 3 3/4 ips. Preplace VU Meters, WOW Excellent looking and performing machine #9+ condition.
Contact us about similar items or replacement parts.
Working machine parted due to poor cosmetics. Head Cover (8+ condition) $48, 2 Reel Tables (8 condition) w/spring $48 each, Board 50484110/TP-N88-S $28, Board 50484103 $24, Board 50484090/TP-N88-S $24, Board 50484080 $24, Mic/Line/Output Controls $16, 2 L/R Mic 1/4 inch jacks $4, 1/4 inch phone jack $4, Function Board 51670623 SOLD, 2 V/U Meters 51650280 $20 each, Board 50484171 $16, Board 50484071 $14, Board 51673310 $36, Tension arm switches $18, Power/speed switch assembly $18, 2 Reel table black plastic rings $6, (2) reel motor caps 3.9 uf, 9uf $22, (3) control knob 1 chrome , 1 plastic #8 $14, pinch roller Cover & 2 washers #7 $16, counter belt $4, flywheel /capstan $30, play engage solenoid $8, sideboard hardware $14, screw kit from machine $14, cue lever $14.
1/4" 2 track deck. Mic/line/output controls. 1/4" mic L/R inputs on face. 1/4" phones jack. Dolby FM/ Dolby NR/ tape, source monitor/ rec bias/ rec EQ/ rec mode, switches, 2 V/U meters, hi/low speed, counter. Low hours use, fully serviced. Brushed aluminum face with wood trim. 9 condition.
Contact us about similar items or replacement parts.
Open Reel Tape Deck (1/4 track stereo) 2 speed, 7 1/2, 3 3/4 IPS. 7" Reels, Rec EQ + Bias (high or normal), hiqh EQ/bias set for Maxell. 1/4 mic/inputs w/ level control. Tape/source monitor switch, electronic transport. 80% head life left , good shape, unit calibration very good. Has few scuffs on front panel. #8+ condition
Contact us about similar items or replacement parts.
All Remotes are now 25% off or Free Shipping!!! (Reel to Reel remotes excluded).
For Parts or Service. Auto Reverse. Excellent condition, but unserviced. Basic switch cleaning done. Needs belt. Great for hobbyist who wants an inexpensive reel to reel. Has one channel out (preamp in). 8+/10 condition.
Bi Directional Recording, Open reel tape deck. High density ferrite heads, 7 1/2" + 3 3/4 IPS 7" Reels. EQ/BIAS Switch normal/high L, R L+R mode switch. Mic input, low machine in excellent condition. Calibrated extremely well and has hub high performance. Used goof #9 condition. NEEDS SERVICING
6011022000. NEW STOCk (2) pcs. available price is for each roller. (Original paperwork is missing, must investigate if more parts available)
Contact us about similar items or replacement parts.
DBX Encoder Cable, 11-pin connector, 24" Cable, Condition #9
#5378301400. Excellent #9 condition with no use.
Parts machine. Machine was probably dismantled, search elsewhere on inventory list
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
4 track 1/4" format. Features include: high/low speed, normal/high EQ/bias, 2 and 4 channel playback. 4 1/4" inputs on face, 2 Stereo RCA in/outs. Missing normal/simulsync on track 1. Excellent cosmetics and heads. Needs basic cleaning and calibration. Unit is worth Heads, Motor, Reel Tables,Headcover etc.
Mint condition with original box packing and ops manual, 10" reel capable unit, with (2) clamp-on NAD hub adapters (not twist lock kind) 3 3/4 and 71/2 IPS. Full service By Audio Pro, controls cleaned, perfect belts, and pinch roller serviced. calibrated to NAB standard, #8 on output control is 0db standard play back. Super near perfect calibration. High bias & EQ is for 7-1/2 ips, Low bias & EQ is for 3-3/4 ips. # 9 condition
Relay board problematic, good reel table 8+(SOLD), head cover ($28), Heads #7 can be upped to #9($60), Sideboards #7+ (SOLD). Call for other parts ALL #8+ condition
7 inch reel to reel. 1 high bias / EQ for 7 1/2 lbs. 2 low bias / EQ for 3 3/4. Recent new belt & pinch roller. Excellent wow flutter. 0 dB playback #7 is 0 dB professional 0 dB level. (10 dB higher than typical consumer). Low use. With Teac front cover with repairer 1 inch. Front arm minor bend. Excellent calibration. Condition 8+.
Contact us about similar items or replacement parts.
Contact us about similar items or replacement parts.
For X-1000. Remote control and cable for many models, does auto-reverse, rec. 20' cable with 12 pin rectangular connector. Tested, very low use, very minor finger wear, #8+
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
3 Head Deck, best version, virtually unused, new capstan belt installed, pinch roller replaced like new, Heads are #9+ condition, virtually no use time, speed spec perfect, #8 output level is odb meter, -10DB output for consumer line level, (Use LH1LH for Maxwell Tape record) all switches completely cleaned, Unit has supply side roller with proper cosmetic cap replaced, unit works perfect #9 Condition
Contact us about similar items or replacement parts.
remote control, 12 pin rectangular connector, tested perfect, condition 8, cord very soiled, cracked grommet at the cable end, still intact
Contact us about similar items or replacement parts.