Auto locator and cable. Very good #9 condition with very minor surface scuff and ding in bottom corner of remote. LED tips have cracked off display holes, need little bezels installed to be more visible.
Part #53783004 with cable and complete platform. 8 track heads in #8 condition. Relapped heads only 30% worn. These are the "cut away edge" and triple guard band shielded, latest high quality version heads.
Power Supply Board PB9A171B. Crucial parts replaced and updated. From well used but operational deck with color code connectors left intact. ( Board update and power supply caps - $88 value ) #8 Condition.
For X-1000. Remote control and cable for many models, does auto-reverse, rec. 20' cable with 12 pin rectangular connector. Tested, very low use, very minor finger wear, #8+
Reproducer calibration tape. 1/2 inch, 15 IPS EQ IEC-1 Ft = 0 & 4500 Hx. 250 NWM/M. Multi frequency 0dB. 8+ Condition Low Use. May be slightly sticky at some areas. $120 each.
407, 1/2 Inch Test Tape, Audio Pro Made Tapes *1 KHZ at ODB speed Calibration, Tascam will read -10 db, output, (0-600 Counter), Otari will read -5db on meters, Condition #9
Vintage tube reel to reel recorder. Excellent cosmetic condition, unit has not been opened or tested. Good for hobbyist or collector. Contact us for more information.
4 track 1/4" deck, 10" reels (hub adapters may be available-for additional cost) , headphone monitor with channel select and volume, jack for RC-70 remote control, pitch, simulsync. Calibrated for Maxell UD-XL Ampex 456 tape. Excellent #9 condition machine, 90% good heads, with very good #8 condition cosmetics. CALL FOR COMPETITIVE PRICING
10" Reel Recorder, Auto Reverse. With NAB hub adaptors. Black face version. Complete professionally cleaned calibrated. Heads & Mechanics excellent, recent new belts, like new Pinch. (RC-100 wired remote is available additional $130 Listing # 54640) 8+ condition
Gray face meters, Gray plastic front panel, Multi AC Voltage version, 6 settings, With smoked front dust cover #7 condition, Heads #8 condition, speed board caps replaced, All electrolytic caps (about 20) in audio and power supply replaced, most tantalum on preamp boards left in as they test OK many replaced as needed, high quality version, unit has typical low frequency enhanced bass EQ response of Revox, All calibrated for Maxell UD tape, excellent performance/spec, (unit auto shutoff sensor is weak operation), #8+ condition
8 track 1/2 inch reel to reel. Function select buttons for each channel. VU meter for each channel. Unit has had ruggedized motherboard re-soldering ($200 value job). Ampex 456 calibrated, +/- 1 db all channels. Fresh pinch roller. Heads low use 9/10 excellent condition. Missing badge, mismatched hardware. Mechanically perfect. 8+/10 condition.
Intact machine that needs proper service. Good pinch, fresh drive belt, all meters light up and respond. However, the motor is weak and there are missing channels. Has hub locks (screw type). Cosmetically good, recommended for a complete overhaul. Condition: 8+
